HellasVagabond
New Member
- Joined
- Jan 19, 2007
- Messages
- 3,376 (0.54/day)
- Location
- Athens , GREECE
System Name | SECONDARY RIG / PRIMARY RIG / THIRD RIG |
---|---|
Processor | i920@3.6GHz / i920@4GHz / AMD Phenom II 955 |
Motherboard | Gigabyte EX58-UD4P / Gigabyte EX58-UD7 / ASRock 890GX3 |
Cooling | CoolIT Domino ALC / Thermalright Silver Arrow / Thermalright VenomousX |
Memory | 12GB DDR3 @ 1800MHZ / 6GB DDR3 @ 2250MHZ / 4GB DDR3 @ 1600MHZ |
Video Card(s) | XFX ATI RADEON 5970 / GAINWARD NVIDIA GTX 580 / 2xGEFORCE GTX295 |
Storage | 1550GB / 6TB SAS - SSD / 160GB SSD |
Display(s) | NEC 26WUXi2 / NEC 3090WQXi / SONY 55A2000 (1080P 55inch) |
Case | COOLER MASTER HAF 932 / COOLER MASTER ATCS 840 / ANTEC DARKFLEET DF85 |
Audio Device(s) | Soundblaster X-Fi Xtreme Music / SoundBlaster X-Fi Fatal1ty Pro / Realtek Onboard |
Power Supply | CWT 1200W / Enermax Revolution 85+ 1250W / Ikonik Vulcan 1200W |
Software | Windows 7 x64 / Windows 7 x64 / Windows 7 x64 |
SpeedFan is a program that monitors voltages, fan speeds and temperatures in computers with hardware monitor chips. SpeedFan can even access S.M.A.R.T. info and show hard disk temperatures. SpeedFan supports SCSI disks too. SpeedFan can even change the FSB
on some hardware (but this should be considered a bonus feature). SpeedFan can access digital temperature sensors and can change fan speeds accordingly, thus reducing noise. SpeedFan can find almost any hardware monitor chip connected to the 2-wire SMBus (System Management Bus (trademark belonging to SMIF, Inc.), a subset of the I2C protocol) and works fine with Windows 9x, ME, NT, 2000, 2003, XP and Windows Vista. It works with Windows 64 bit.
History
4.38
-added full support for AMCC/3ware SMART readings
-added full support for Intel QST
-added full support for ADT7470
-added full support for ADT7462
-added full support for nVidia MCP79 SMBus
-added full support for SiS968 SMBus
-added full support for Intel i7 internal core temperature reading
-improved ITE IT8720F identification
-added Fintek F71858 temperature readings
-PC87360, PC87362, PC87363, PC87364, PC87366 do hide unavailable readings now
-ProbeGL5xxSM now checks some more registers to try to avoid false detections
-improved CPU identification routines
-improved FB-DIMM support on some Intel chipsets
-the exotics tab now shows the fitness of the hard disks connected to ARECA RAID controllers too
-ARECA and AMCC/3WARE connected hard disks are now searched before the standard channels, trying to avoid aliased, merged or fake reported SMART data
-added identification of Fintek F75125R
-removed two debug messages related to UGURU3
-added some debug code to try to support VIA CX700/VX700 SMBus
-DELL SUPPORT is now checked on ATI SBx00, Intel 631xESB, ICH8, ICH9 and ICH10 too
-disabled DELL support on 64 bit systems
-added /NODELLSCAN command line parameter
-fixed daylight saving time handling in event emails
-added full support for Windows 7 32 and 64 bit
-fixed a minor bug that caused the main window to be minimized when clicked
-CONFIGURATION / SPEEDS SpinBoxes now allow manual edit
-added some scan exceptions for Asus M2N-E and for Dell 0G841G
-INSTALLER: improved OS identification
-INSTALLER: fixed the ADMIN identification issue
DOWNLOAD
Enjoy guys
on some hardware (but this should be considered a bonus feature). SpeedFan can access digital temperature sensors and can change fan speeds accordingly, thus reducing noise. SpeedFan can find almost any hardware monitor chip connected to the 2-wire SMBus (System Management Bus (trademark belonging to SMIF, Inc.), a subset of the I2C protocol) and works fine with Windows 9x, ME, NT, 2000, 2003, XP and Windows Vista. It works with Windows 64 bit.
History
4.38
-added full support for AMCC/3ware SMART readings
-added full support for Intel QST
-added full support for ADT7470
-added full support for ADT7462
-added full support for nVidia MCP79 SMBus
-added full support for SiS968 SMBus
-added full support for Intel i7 internal core temperature reading
-improved ITE IT8720F identification
-added Fintek F71858 temperature readings
-PC87360, PC87362, PC87363, PC87364, PC87366 do hide unavailable readings now
-ProbeGL5xxSM now checks some more registers to try to avoid false detections
-improved CPU identification routines
-improved FB-DIMM support on some Intel chipsets
-the exotics tab now shows the fitness of the hard disks connected to ARECA RAID controllers too
-ARECA and AMCC/3WARE connected hard disks are now searched before the standard channels, trying to avoid aliased, merged or fake reported SMART data
-added identification of Fintek F75125R
-removed two debug messages related to UGURU3
-added some debug code to try to support VIA CX700/VX700 SMBus
-DELL SUPPORT is now checked on ATI SBx00, Intel 631xESB, ICH8, ICH9 and ICH10 too
-disabled DELL support on 64 bit systems
-added /NODELLSCAN command line parameter
-fixed daylight saving time handling in event emails
-added full support for Windows 7 32 and 64 bit
-fixed a minor bug that caused the main window to be minimized when clicked
-CONFIGURATION / SPEEDS SpinBoxes now allow manual edit
-added some scan exceptions for Asus M2N-E and for Dell 0G841G
-INSTALLER: improved OS identification
-INSTALLER: fixed the ADMIN identification issue
DOWNLOAD
Enjoy guys