The Intel Core i7 Overclockers Club

[mudkip]

Use the edit button lol , cool overclocks btw only 772mb with linpack isn't enough l(

 

[MetalRacer]

Here's another run with more memory used.

 

[johnnyfiive]

I dont care about your CPU clocks, I'm busy looking at two things...

 

[Chicken Patty]

I dont care about your CPU clocks, I'm busy looking at two things...

that's what I said to myself, but I didn't wanna tell him

 

[DarkEgo]

My rig should be back up monday or tuesday. I hoping to get up to 4.4 with this DO.

 

[Chicken Patty]

My rig should be back up monday or tuesday. I hoping to get up to 4.4 with this DO.

keep us posted. IS that why it is down? Waiting on the new CPU?

 

[DarkEgo]

No, waiting on a new pump. This LCing system has kept me down all summer from one problem or another. And when it desides to leak, it soaks my room.

 

[Chicken Patty]

No, waiting on a new pump. This LCing system has kept me down all summer from one problem or another. And when it desides to leak, it soaks my room.

DAMMIT MAN, glad things will finally be resolved. Good luck man! you haven't fried any hardware due to leaks yet right?

 

[DarkEgo]

Nope 48 Hour leak test FTW!

 

[Chicken Patty]

Nope 48 Hour leak test FTW!

good! Thank god.

 

[PaulieG]

I dont care about your CPU clocks, I'm busy looking at two things...

Yeah Metal, I should give you a custom infraction for distracting a mod.

 

[johnnyfiive]

^^ You should make him a mod for making my day.

 

[Chicken Patty]

I just realized metal racer had achieved 4.2 GHz in that screenshot

 

[Chicken Patty]

ALright guys the most I can get stable out of this D0 chip is 3.9 Ghz, i'm trying for 4ghz now using the below settings. Funny thing was when I first put the chip in, it did 4.5 GHz flawlessly, but I was just running Wprime. Now at 4.1 ghz it wont even boot up to the logon screen. I tried more voltage on everything and nothing.

Here is my BIOS settings for 4GHz

Mother Board ( EVGA X58 )
Bios ( )
CPU ( 920 )
Batch ( # )
CPU Cooler ( Water Cooled )
Memory ( Nanya 6GB DDR3-1066 7--7-27 ) <<<Not Sure about the specs of the RAM


CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 191 )

CPU Uncore Frequency (Mhz) ( 16x )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )

Memory Feature
Memory Control Setting ( Enabled )
Memory Frequency ( 2:6 )
Channel Interleave Setting ( 6 Way )

Rank Interleave Setting ( 4 Way )
Parameters
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 20 )
tRFC Setting ( 74 )
Command Rate ( 1T )

Voltage Control
EVGA VDroop Control ( Without VDroop )

CPU VCore ( 1.14375v )
CPU VTT Voltage ( +0 (1.2v) )
CPU PLL VCore ( 1.800vv )
DIMM Voltage ( 1.600v ) BIOS reads 1.51v
DIMM DQ Vref ( +0 )
QPI PLL VCore ( Auto )
IOH VCore ( Auto )
IOH/ICH I/O Voltage ( Auto )

ICH VCore ( Auto )
PWM Frequency ( 800 )

CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )

Logical Processor Setting
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Settings
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.8 )


Core frequency: 191 x 21 = 4011 MHz
Uncore frequency: 191 x 16 = 3056 MHz
Memory frequency: 191 x 6 = 1146 MHz
QPI frequency: 191 x 18 = 3438 MHz

Hyperthreading: Enabled
Turbo Mode: Enabled

 

[Chicken Patty]

guys, I need some help. THe above template failed prime, so I tried this one, manually set some voltages and still nothing after the above had failed, this failed even quicker, last try didn't even make it into windows. I'm really starting to think something is getting too hot. First it was a BSOD, then its just a reboot. I Had the case opened and a fan facing the vreg/NB area, everything stayed cool to the touch, i'm puzzled, just dont get it.

Here is the last settings I tried that failed also, any suggestions?

Mother Board ( EVGA X58 )
Bios ( )
CPU ( 920 )
Batch ( # )
CPU Cooler ( Water Cooled )
Memory ( Nanya 6GB DDR3-1066 7--7-27 ) <<<Not Sure about the specs of the RAM


CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 191 )

CPU Uncore Frequency (Mhz) ( 16x )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )

Memory Feature
Memory Control Setting ( Enabled )
Memory Frequency ( 2:6 )
Channel Interleave Setting ( 6 Way )

Rank Interleave Setting ( 4 Way )
Parameters
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 20 )
tRFC Setting ( 74 )
Command Rate ( 1T )

Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.1500v )
CPU VTT Voltage ( +100 )
CPU PLL VCore ( 1.800vv )
DIMM Voltage ( 1.700v ) BIOS reads 1.61v
DIMM DQ Vref ( +0 )
QPI PLL VCore ( 1.3500v )
IOH VCore ( 1.2750v )
IOH/ICH I/O Voltage ( Auto )
ICH VCore ( Auto )
PWM Frequency ( 800 )

CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )

Logical Processor Setting
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Settings
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.8 )


Core frequency: 191 x 21 = 4011 MHz
Uncore frequency: 191 x 16 = 3056 MHz
Memory frequency: 191 x 6 = 1146 MHz
QPI frequency: 191 x 18 = 3438 MHz

Hyperthreading: Enabled
Turbo Mode: Enabled

 

[PaulieG]

guys, I need some help. THe above template failed prime, so I tried this one, manually set some voltages and still nothing after the above had failed, this failed even quicker, last try didn't even make it into windows. I'm really starting to think something is getting too hot. First it was a BSOD, then its just a reboot. I Had the case opened and a fan facing the vreg/NB area, everything stayed cool to the touch, i'm puzzled, just dont get it.

Here is the last settings I tried that failed also, any suggestions?

Mother Board ( EVGA X58 )
Bios ( )
CPU ( 920 )
Batch ( # )
CPU Cooler ( Water Cooled )
Memory ( Nanya 6GB DDR3-1066 7--7-27 ) <<<Not Sure about the specs of the RAM


CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 191 )

CPU Uncore Frequency (Mhz) ( 16x )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )

Memory Feature
Memory Control Setting ( Enabled )
Memory Frequency ( 2:6 )
Channel Interleave Setting ( 6 Way )

Rank Interleave Setting ( 4 Way )
Parameters
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 20 )
tRFC Setting ( 74 )
Command Rate ( 1T )

Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.5000v )
CPU VTT Voltage ( +100 )
CPU PLL VCore ( 1.800vv )
DIMM Voltage ( 1.700v ) BIOS reads 1.61v
DIMM DQ Vref ( +0 )
QPI PLL VCore ( 1.3500v )
IOH VCore ( 1.2750v )
IOH/ICH I/O Voltage ( Auto )
ICH VCore ( Auto )
PWM Frequency ( 800 )

CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )

Logical Processor Setting
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Settings
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.8 )


Core frequency: 191 x 21 = 4011 MHz
Uncore frequency: 191 x 16 = 3056 MHz
Memory frequency: 191 x 6 = 1146 MHz
QPI frequency: 191 x 18 = 3438 MHz

Hyperthreading: Enabled
Turbo Mode: Enabled

Damn CP, WTF? That chip did 4.5 on just 1.37v. There's got to be some issue other than the chip...Your settings look fine except for that crazy high vcore. If you keep having issues, my offer still stands!

 

[Deleted member 74752]

Sometimes it helps to back up a bit on these chips. Try these if you like. It really looks to be more of a memory problem tho...

21 x 210

vcore 1.41

vtt 1.35

QPI PLL 1.1

CPU PLL 1.8

IOH vcore 1.1

IOH/ICH/I/O 1.5

ICH vcore 1.05

 

[johnnyfiive]

I'm in the same boat as CP, mine will boot at 4.4GHz wih 1.35v. But I can't seem to get 4.0 stable no matter what setting I use. 20x200, 21x191, 19x211, it doesn't matter what multiplier/blck setup. It falls on its face during prime.

Edit: I forgot to add that 1.3+v I've avoided for 4.0. I havent done TOO much testing because I'm too dang busy right now. But for 4.0, I may have to resort to 1.3-1.33v+ and 1.35v vtt/qpi. I'm too happy with my 3.6GHz @ 1.16v, 1.29vtt, and 1,800MHz DDR3 8-8-8-18 @ 1.65v. I'm focused on i5 stuff right now...

 

[Chicken Patty]

Damn CP, WTF? That chip did 4.5 on just 1.37v. There's got to be some issue other than the chip...Your settings look fine except for that crazy high vcore. If you keep having issues, my offer still stands!

Sorry Paul, vcore was 1.1500

Sometimes it helps to back up a bit on these chips. Try these if you like. It really looks to be more of a memory problem tho...

21 x 210

vcore 1.41

vtt 1.35

QPI PLL 1.1

CPU PLL 1.8

IOH vcore 1.1

IOH/ICH/I/O 1.5

ICH vcore 1.05

i'll give these a shot, however vcore I dont need that much. I did 4.5ghz stable enough to run wprime a few times and super pi @ 1.35v. This chip is great, just dont know why something is crapping on me lately.

 

[Chicken Patty]

alright guys, good news. Stability issue for some reason is gone. I just flashed to newest BIOS (SZ2P). Here I am at the moment, crunching since I booted. roughly about 2 hours.

 

[Deleted member 74752]

Cool beans!

 

[Chicken Patty]

Cool beans!

yeah man, it plauged me for about a week or so, I was about to RMA everything I could

 

[Deleted member 74752]

I go through those spells myself with the bench rig. Sometimes I just have to get up and walk away from it for awhile. Go play a game or something...

 

[Chicken Patty]

I go through those spells myself with the bench rig. Sometimes I just have to get up and walk away from it for awhile. Go play a game or something...

yeah man, this was the worst ever. Thank god it seems to be fine now. I'll keep you guys posted as I try to go higher

 

[johnnyfiive]

Bye bye warranty

Noticing a 3-4c drop overall.

Was sooooo uneven