The Modded CPU clubhouse

Fuse-Wire · Nov 14, 2007

Welcome

Hey guys, Panchoman gave me the idea of this club so nearly all the credit goes to him :laugh:

The club is open to anyone who has a modded CPU (e.g. Pin-Mod) if you can please include a picture it would go a bit better i think.

Last of all have fun, and don't try too hard!!

Captain: Fuse-Wire
Vice-Captain: Panchoman
JR Racinfan
craigwhiteside
Spud107
suraswami

Fuse-Wire · Nov 14, 2007

This is my pentium sytem with pin-mods, hopefully with an alternate board i can also apply voltage modding as my current board doesn't support the feature. :mad:

hat · Nov 14, 2007

I overclocked mine via BIOS :laugh:

j/k

panchoman · Nov 14, 2007

very nice, can you do a multiplier mod on that cpu fuse?

3991vhtes · Nov 14, 2007

I took the IHS off my K6 350

does this count?

spud107 · Nov 14, 2007

fuse wires pc before it was sold to him. . . minus ihs

Fuse-Wire · Nov 15, 2007

3991vhtes said:
I took the IHS off my K6 350

does this count?

if it made a difference then i don't see why not.

and pancho, well i know there IS a way to clock it to 3GHZ on it's current board but im not to sure on how to achieve it, though i have been given a new board to try out by spud107 that hopefully gives me some volt modding options, at the moment on the current board when it clocks at 3GHZ (tested by Spud107) i think it looses sound, hopefully with the new board when i clock it to 3GHZ and maybe beyond i can keep sound, just have to wait and see till tommorow

Fuse-Wire · Nov 15, 2007

yeah Spud, that was a sweet overclock you had. what setup was that from??

panchoman · Nov 15, 2007

Fuse-Wire said:
if it made a difference then i don't see why not.

and pancho, well i know there IS a way to clock it to 3GHZ on it's current board but im not to sure on how to achieve it, though i have been given a new board to try out by spud107 that hopefully gives me some volt modding options, at the moment on the current board when it clocks at 3GHZ (tested by Spud107) i think it looses sound, hopefully with the new board when i clock it to 3GHZ and maybe beyond i can keep sound, just have to wait and see till tommorow

good luck with that man :toast:

hat · Nov 15, 2007

Can anyone dig up the socket 370 pin mod? I wanna try it on my Celeron 533.

spud107 · Nov 15, 2007

Fuse-Wire said:
yeah Spud, that was a sweet overclock you had. what setup was that from??

your one lol, was making sure i got the most hwbot points from it.

3991vhtes · Nov 15, 2007

Fuse-Wire said:
if it made a difference then i don't see why not.

Does breaking the chip into two count as a difference?

Fuse-Wire · Nov 15, 2007

spud107 said:
your one lol, was making sure i got the most hwbot points from it.

lol fair enough, awell, need to go get ma tower from shauns then put the new mobo in, gotta wait till he gets back from college though.

Fuse-Wire · Nov 15, 2007

3991vhtes said:
Does breaking the chip into two count as a difference?

unless you can somehow scramble it into a duel core then im afraid not :laugh:

3991vhtes · Nov 15, 2007

LOL.

RIP K6-2 350

It wasnt even mine when I broke it

Fuse-Wire · Nov 15, 2007

hat said:
Can anyone dig up the socket 370 pin mod? I wanna try it on my Celeron 533.

i think this is what you are looking for,

easier to do than you first expect

Fuse-Wire · Nov 15, 2007

3991vhtes said:
LOL.

RIP K6-2 350

It wasnt even mine when I broke it

well trying to get the heatsink off my celeron is sooper hard, too much pressure and my processor will simply snap, gotta be careful when i swap boards over

3991vhtes · Nov 15, 2007

I *would* attempt another IHS removal, But, Since I've killed 2 K6-2's, I think I'll just leave it the way it is.

Fuse-Wire · Nov 15, 2007

3991vhtes said:
I *would* attempt another IHS removal, But, Since I've killed 2 K6-2's, I think I'll just leave it the way it is.

yeah would agree on you with that, 2 blowing up without a sucssesfull results is kinda a sign that it isn't going to work!

hat · Nov 15, 2007

Fuse-Wire said:
i think this is what you are looking for,

easier to do than you first expect

Any reccomendations?
Oh, and I still need the second picture... the one where it says to cover/pull out one other pin. Extra volts won't to me any good on stock settings

Fuse-Wire · Nov 15, 2007

cool if forgot that sorry, ill get it for you asap, i cant do any volt mods till i install the new mobo, couldn't be bothered doing it today

Fuse-Wire · Nov 15, 2007

f you still want to do the pin mod, you have to cover or break BSEL (AJ31) pin. You should try nail varnish or something that will come off with a bit of isopropyl alcohol/acetone. You don't want this to be permanent because I strongly doubt your chip will like running at 133x13.

Fuse-Wire · Nov 15, 2007

Socket 370 volt modding

im sure this is the volt mod im using to well obviously boosting the volt. Hat im sure you could find this useful if you ever consider volt modding

hat · Nov 15, 2007

I don't care if it blows up. It's only a F@H box anyway. And socket 370 cpu's are cheap if I ever need a replacement. THAT SUCKER'S COMING OFF :roll:

Fuse-Wire · Nov 15, 2007

hahaha so true, its my system at the moment but hopefully soon it will be replaced! if your not too bothered about it maybe you should see if volt modding is an option on your board especially for F@H, able to process WU quicker than you can at the moment

System Name	The Box
Processor	DualCore AMD Athlon 64 X2 2300MHz (11.5x200) 4400+
Motherboard	AsRock N 68-S
Cooling	Basic 90mm fans
Memory	OCZ XTC Platinum 2GB DDR-2 800 SDRAM
Video Card(s)	ATI Saphire x1650 Pro Series
Storage	Maxtor 6L300R0 (300GB) Maxtors S (250GB)
Display(s)	19" LCD CTX
Case	EYE-T
Audio Device(s)	Realtek ALC650 @ Intel 82801DB ICH4 - AC'97 Audio Controller [B-0]
Power Supply	600W colors-IT super quiet
Software	Microsoft 7 Ultimate

System Name	The Box
Processor	DualCore AMD Athlon 64 X2 2300MHz (11.5x200) 4400+
Motherboard	AsRock N 68-S
Cooling	Basic 90mm fans
Memory	OCZ XTC Platinum 2GB DDR-2 800 SDRAM
Video Card(s)	ATI Saphire x1650 Pro Series
Storage	Maxtor 6L300R0 (300GB) Maxtors S (250GB)
Display(s)	19" LCD CTX
Case	EYE-T
Audio Device(s)	Realtek ALC650 @ Intel 82801DB ICH4 - AC'97 Audio Controller [B-0]
Power Supply	600W colors-IT super quiet
Software	Microsoft 7 Ultimate

System Name	Starlifter :: Dragonfly
Processor	i7 2600k 4.4GHz :: i5 10400
Motherboard	ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling	Cryorig M9 :: Stock
Memory	4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s)	PNY GTX1070 :: Integrated UHD 630
Storage	Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s)	Onn 165hz 1080p :: Acer 1080p
Case	Antec SOHO 1030B :: Old White Full Tower
Audio Device(s)	Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply	FSP Hydro GE 550w :: EVGA Supernova 550
Software	Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores	>9000

Processor	Amd Athlon X2 4600+ Windsor(90nm) EE(65W) @2.9-3.0 @1.45
Motherboard	Biostar Tforce [Nvidia] 550
Cooling	Thermaltake Blue Orb-- bunch of other fans here and there....
Memory	2 gigs (2x1gb) of patriot ddr2 800 @ 4-4-4-12-2t
Video Card(s)	Sapphire X1950pro Pci-E x16 @stock@stock on stock
Storage	Seagate 7200.11 250gb Drive, WD raptors (30/40) in Raid 0
Display(s)	ANCIENT 15" sony lcd, bought it when it was like 500 bucks
Case	Apevia X-plorer blue/black
Audio Device(s)	Onboard- Why get an sound card when you can hum??
Power Supply	Antec NeoHe 550-manufactured by seasonic -replacement to the discontinued smart power series
Software	Windows XP pro SP2 -- vista is still crap

Processor	AMD Athlon 64 3800+ Venice 2.4GHz
Motherboard	ASUS A8V-VM SE
Cooling	Stock
Memory	1GB DDR400
Video Card(s)	DiamondViper Radeon X1650PRO 512MB PCI-e
Storage	Seagate 250GB SATA
Display(s)	Acer AL2002W 20" LCD Widescreen
Case	cheap
Audio Device(s)	Creative SoundBlaster
Power Supply	500 watt
Software	Vista Ultimate
Benchmark Scores	4.1 Vista index

System Name	spuds K8-X2
Processor	amd athlon X2 4200+ toledo s939 2794mhz 254x11 1.4 vcore
Motherboard	MSI K8N Neo4-F v1.0 (MS-7125) nforce4 sata2 mod, laptop cpu heatpipe copper nb cooler
Cooling	akasa evo "blue" + 90mm fan, 2x120mm front, 250mm side, 120mm rear, 120mm in psu, pci slot exhaust.
Memory	OCZ Platinum XTC DDR PC3200 4GB(4x1024) @254mhz 3-3-3-8 2T
Video Card(s)	sapphire HD3870 512mb GDDR4 vf900cu, several ramsinks on components / nvidia 7300gt 256mb secondary
Storage	hitachi 160gb (slightly fried) / hitachi 120gb ATA / Seagate 160gb / 2x ps3 seagate 60gb
Display(s)	CTX EX1300F 20" flat CRT, 1280x1024@100hz / 19" benq FP91G X / 19" hanns-g (all free)
Case	mesh server/gaming black case, 9x 5.25' drive bays, silvestone auto fan controller
Audio Device(s)	onboard realtek alc850 7.1/soundblaster LIVE! ct4780 + kxaudio - sony home theatre surround
Power Supply	winpower 650w, system draws around 470-500w under load(+all screens)
Software	win7 64bit
Benchmark Scores	~16m trips/sec using mty trip generator. triple monitor gaming using SoftTH. 3840x1024

The Modded CPU clubhouse

New Member

New Member

Enthusiast

Sold my stars!

New Member

New Member

New Member

Sold my stars!

Enthusiast

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

Enthusiast

New Member

New Member

New Member

Enthusiast

New Member