TPU's WCG/BOINC Team

[FireFox]

Amd fx 6300 no overclocked Crunching

 

[ThE_MaD_ShOt]

Amd fx 6300 no overclocked Crunching

Like I have mentioned I spend about 150 a month for electric for all 11 of my rigs.

 

[TRWOV]

OCed the 1090t to 4Ghz @ 1.425v. Vcore seems to be a little high according to what I've read but I guess I can't ask much from a 4+1 board. 4.2 required 1.475 so I settled for 4Ghz.

 

[thebluebumblebee]

Amd fx 6300 no overclocked Crunching

If it takes 200 watts, (which is intentionally high) that's 1750 KWH/year. Multiply that by your rate.

 

[krusha03]

Amd fx 6300 no overclocked Crunching

My FX6300 is overclocked to 4.55GHz and 1.4V and uses about 250W at 100% load when crunching, about 190W at 60% load and 140W at idle. If you want, you can tell me your settings and I can test it at stock

 

[manofthem]

OCed the 1090t to 4Ghz @ 1.425v. Vcore seems to be a little high according to what I've read but I guess I can't ask much from a 4+1 board. 4.2 required 1.475 so I settled for 4Ghz.

I had a 1090t @4ghz @1.4v, so it's not too high relatively speaking, but then again it was quite a while ago so I might be a little outdated lol..

Not bad considering

 

[Arjai]

10.04.4 Ubuntu. Currently installing on This 'Ole Comp. It was the only i386 version that would fit on a 700MB CD, all I have at the moment.

Tomorrow, I hope to upgrade it to 14.whatever. Wish me luck!!

 

[FireFox]

My FX6300 is overclocked to 4.55GHz and 1.4V and uses about 250W at 100% load when crunching, about 190W at 60% load and 140W at idle. If you want, you can tell me your settings and I can test it at stock

Sorry for the late replay, here are some info:

 

[krusha03]

Sorry for the late replay, here are some info:

Do you have CnQ enabled? i think your CPU is either underclocking or throttling since CPU-Z reports it at 1.4Ghz instead of 3.5Ghz (and look at those dips in cpu usage in the task manager). Also unless you did undervolting stock voltage is about 1.3 - 1.35 at 3.5Ghz

 

[krusha03]

Sorry for the double post guys but I am hoping the alert will help more people see this post. I am having an issue with linking my WCG account to the newly created BOINC stat account (afaik i did not have a boinc account before). I would like to install for example BOINC on my phone and maybe my laptop as well and to have all of them contributing points to the same place. For some reason when i go to add projects to my boinc account and do search (user name is the same "krusha03") it says no user found. Can anyone tell me the proper way to do this

 

[Caring1]

Sorry for the double post guys but I am hoping the alert will help more people see this post. I am having an issue with linking my WCG account to the newly created BOINC stat account (afaik i did not have a boinc account before). I would like to install for example BOINC on my phone and maybe my laptop as well and to have all of them contributing points to the same place. For some reason when i go to add projects to my boinc account and do search (user name is the same "krusha03") it says no user found. Can anyone tell me the proper way to do this

Probably because "krusha03 is not a Project, it is your user name.
Maybe you can clarify what steps you took?

 

[FireFox]

Do you have CnQ enabled? i think your CPU is either underclocking or throttling since CPU-Z reports it at 1.4Ghz instead of 3.5Ghz (and look at those dips in cpu usage in the task manager). Also unless you did undervolting stock voltage is about 1.3 - 1.35 at 3.5Ghz

I just setup E-PU 4 Engine Auto and it does everything it self.

 

[FireFox]

I would like to install for example BOINC on my phone

I posted on page 1120, i tried:
BOINC
BOINC Echo
AndroBOINC
and none works

 

[krusha03]

Probably because "krusha03 is not a Project, it is your user name.
Maybe you can clarify what steps you took?

So I had my wcg account. Downloaded boinc on my android and it wanted a user name and password which was not the same as my wcg account. Then I went to boincstats and made a user with the same username and email, went to sign up for project and under WCG i clicked find account. This returned that no account has been found, but if I search for my name in the stats it's there. So how can I link these 2?

Sorry if I am not clearer worked the night shift and slept for only 3 hours

I just setup E-PU 4 Engine Auto and it does everything it self.

Do you have HWinfo? leave it running in the background, as it monitors temperatures, voltages and frequencies, so you can see if the cpu is clocking down. I personally have desabled all power saving features to force the cpu running at max at all times.

I posted on page 1120, i tried:
BOINC
BOINC Echo
AndroBOINC
and none works

I cant do it even on the website itself. I am probably doing something wrong but no idea what. Maybe I even have a boincstats account who knows

 

[FireFox]

Do you have HWinfo? leave it running in the background, as it monitors temperatures, voltages and frequencies, so you can see if the cpu is clocking down. I personally have desabled all power saving features to force the cpu running at max at all times.

Here:
As you can see the CPU is underclocking because I try not to get a high Electricity bill and I don't know how much power it will use at max.

Like I have mentioned I spend about 150 a month for electric for all 11 of my rigs.

how much do you pay per ct/kWh?

here is an example:

 

[ThE_MaD_ShOt]

how much do you pay per ct/kWh?

here is an example:
View attachment 62713

Hell if I know, I will check the bill when I get home.


@Norton coming for you buddy. In a little over 2.5 years I may catch you lol

 

[FireFox]

Hell if I know, I will check the bill when I get home.

I can't tell how much i will pay because as i already explained in another Thread I pay 960€ per year 80€ per month and at the end of the year if i use more than 960€ I have to pay the difference and if I use less then i get the rest back.

 

[ThE_MaD_ShOt]

Well using my figures which I don't have the kw/hr rate yet and also I am basing my figures using Us currency, I figure its costing me an average of about $165 per rig per year to run 24/7/365 100% load.

 

[Norton]

Hell if I know, I will check the bill when I get home.


@Norton coming for you buddy. In a little over 2.5 years I may catch you lol

Come on up! Just remember that you need pass @t_ski first

 

[krusha03]

Here:

As you can see the CPU is underclocking because I try not to get a high Electricity bill and I don't know how much power it will use at max.
View attachment 62710

Using the following settings I get ~180W from the plug for my system with my 80Plus Bronze PSU, 7950, 3 HDDs, SSD and 4 Fans with all puny green features off

Spoiler

 

[ThE_MaD_ShOt]

Come on up! Just remember that you need pass @t_ski first

But but but @t_ski may pass you first. Hell if I am reading it right, looks like @Jstn7477 may pass both of you before I can get there. If we all keep going at the rate we are now it would take me almost 3.5 years to catch him. Top 3 probably would never happen in my lifetime LOL

 

[FireFox]

Using the following settings I get ~180W from the plug for my system with my 80Plus Bronze PSU, 7950, 3 HDDs, SSD and 4 Fans with all puny green features off

Spoiler

I set it back to Max.

 

[Arjai]

OK, so. I mistakenly downloaded 10.04.4 Server, instead of the LTS desktop. So, I went back to burn another disc of the LTS, it appeared to be the same size download. It is not, it is half a gig bigger and would not fit on my 700MB CDr.

So, after getting 2 hours of sleep and going to work, I went out to the Mall and hit up Best Buy for some 4gig DVD+R's.

Now I am attempting to put 14.04.4 LTS on a Socket A 2600+ AMD system, This 'Ole Comp. I have two Scusi drives, Master and Slave, and am attempting to put it on a 40gig WD drive.

It appears to be going well then, it will hang. I have booted for the 3rd time, just now. It goes farther each time so, eventually I may get it running, eventually!

*EDIT* OK, so, perhaps even a 32 bit 14.04.1 is a bit much for this relic. 2 more reboots and no farther along. So, dialing it back to 12.04.05. Hopefully this will work a bit smoother?

Now to waste an hour for the download!!

 

[ThE_MaD_ShOt]

OK, so. I mistakenly downloaded 10.04.4 Server, instead of the LTS desktop. So, I went back to burn another disc of the LTS, it appeared to be the same size download. It is not, it is half a gig bigger and would not fit on my 700MB CDr.

So, after getting 2 hours of sleep and going to work, I went out to the Mall and hit up Best Buy for some 4gig DVD+R's.

Now I am attempting to put 14.04.4 LTS on a Socket A 2600+ AMD system, This 'Ole Comp. I have two Scusi drives, Master and Slave, and am attempting to put it on a 40gig WD drive.

It appears to be going well then, it will hang. I have booted for the 3rd time, just now. It goes farther each time so, eventually I may get it running, eventually!

I used like 9.04 or something on my socket A rigs with no issues at all.

 

[twilyth]

OK, so. I mistakenly downloaded 10.04.4 Server, instead of the LTS desktop. So, I went back to burn another disc of the LTS, it appeared to be the same size download. It is not, it is half a gig bigger and would not fit on my 700MB CDr.

So, after getting 2 hours of sleep and going to work, I went out to the Mall and hit up Best Buy for some 4gig DVD+R's.

Now I am attempting to put 14.04.4 LTS on a Socket A 2600+ AMD system, This 'Ole Comp. I have two Scusi drives, Master and Slave, and am attempting to put it on a 40gig WD drive.

It appears to be going well then, it will hang. I have booted for the 3rd time, just now. It goes farther each time so, eventually I may get it running, eventually!

*EDIT* OK, so, perhaps even a 32 bit 14.04.1 is a bit much for this relic. 2 more reboots and no farther along. So, dialing it back to 12.04.05. Hopefully this will work a bit smoother?

Now to waste an hour for the download!!

If you're using SCSI drives then you might need to update your drivers. But since you said master/slave I'm guessing you have IDE drives. That is more likely but I figured I'd mention this just in case.