- Joined
- May 27, 2008
- Messages
- 3,628 (0.62/day)
System Name | Ultra 64 |
---|---|
Processor | NEC VR4300 (MIPS R4300i) |
Motherboard | proprietary design |
Cooling | Fanless aircooled |
Memory | 4.5MB 250 MHz RDRAM |
Video Card(s) | 62.5 MHz Reality Coprocessor |
Storage | 32 - 512 Mbit ROM Cartridge |
Display(s) | 720x576 |
Case | Clear Blue Funtastic |
Audio Device(s) | 16-bit CD quality |
Power Supply | proprietary design |
Mouse | N64 mouse for use with N64DD |
Keyboard | N64 keyboard for use with N64DD |
Im half way through my build but i have only just found this thread so i thought id show the world my, i think, very good looking rig
Wat ive done:
First I cut a basic window shape in the side pannel, not very original mod i no but it was the first thing i did
Second i added a blow hole on the top, again not very original but hey i like it the blow hole used to suck air out of my rig and i had one of them cotton fake fire things on top so it looked like fire comeing out the top of my rig, but i realised it would cool my ram down better if the air was sucked in so the fire had to go
Third was the paint job, LIME GREEN!!!!!!! of cause (i should have done it last)
Forth was ad a window to the front of the case and give it a lime green tint (completally my own idea that one)
and the last thing ive done is add 16 green leds around the glass window, finished last night
Next to do:
Finish Of the Drive bay controll pannel, willl include toggle switch for lights, usb connector, manual fan speen controll, power and hard drive lights, and maby a little screen for graphics card temp.
Respray and tidy up and dents or damage then give a a coat of varnish to finish off.
Well thats it so far ive spent a good few months on this and tbh i love it great hobby.
Let me no what you think or any ideas how to finish of things or make them better all comments welcome good or bad cheers
ste
<a href="http://s288.photobucket.com/albums/ll192/ste2425/?action=view¤t=Photo-0091.jpg" target="_blank"><img src="http://i288.photobucket.com/albums/ll192/ste2425/Photo-0091.jpg" border="0" alt="Photobucket"></a>
Wat ive done:
First I cut a basic window shape in the side pannel, not very original mod i no but it was the first thing i did
Second i added a blow hole on the top, again not very original but hey i like it the blow hole used to suck air out of my rig and i had one of them cotton fake fire things on top so it looked like fire comeing out the top of my rig, but i realised it would cool my ram down better if the air was sucked in so the fire had to go
Third was the paint job, LIME GREEN!!!!!!! of cause (i should have done it last)
Forth was ad a window to the front of the case and give it a lime green tint (completally my own idea that one)
and the last thing ive done is add 16 green leds around the glass window, finished last night
Next to do:
Finish Of the Drive bay controll pannel, willl include toggle switch for lights, usb connector, manual fan speen controll, power and hard drive lights, and maby a little screen for graphics card temp.
Respray and tidy up and dents or damage then give a a coat of varnish to finish off.
Well thats it so far ive spent a good few months on this and tbh i love it great hobby.
Let me no what you think or any ideas how to finish of things or make them better all comments welcome good or bad cheers
ste
<a href="http://s288.photobucket.com/albums/ll192/ste2425/?action=view¤t=Photo-0091.jpg" target="_blank"><img src="http://i288.photobucket.com/albums/ll192/ste2425/Photo-0091.jpg" border="0" alt="Photobucket"></a>