- Joined
- Oct 15, 2006
- Messages
- 2,341 (0.37/day)
- Location
- Tyne & Wear, UK
System Name | AMD '13 |
---|---|
Processor | FX-6300 @ 4.43GHz (1.35v) |
Motherboard | Gigabyte GA-970A-DS3 rev 1.0 (F6) |
Cooling | Cooler Master T2 + x2 case fans |
Memory | 2x4Gb Crucial Ballistix Sport DDR3-1600 (Stock) |
Video Card(s) | Gigabyte GTX650 Ti OC 2Gb @ 1110/1500 |
Storage | Corsair 240Gb SSD / Seagate 500Gb HDD + old skool IDE HDD's x 3 |
Display(s) | Acer 23'' LED |
Case | Billy Basic |
Audio Device(s) | Onboard 8.1 HD |
Power Supply | Corsair CX600 |
Software | Windows 7 Ultimate x64 |
Benchmark Scores | Smenchmarks |
yes Alcpone it does because my friend has the same board im sure its go in bios advance,chipset settings then it should be the dram frequency change it from ddr400 to 333 and then see if you can clock any further if not then the cpu is going to require a bump in voltage good luck Oc
Knocked ram down to 166Mhz and went for 230 FSB, appeared like it would boot, but just after post it said a system32 file was missing, which it has done in the past when the bios had to be reset and I forgot to put 1st hdd drive to right 1 lol
So went back to check it aint changed itself and it hadnt, so went back to previous oc and worked straight away!
I will get a nice oc with DDR800 though shouldnt I? I know the board will only run it @ 667 @ stock but atleast there is room for oc'ing and when I get a new mobo that can support higher ram speeds I will have the stuff already, thats my theory anyway!