caveman_1990
New Member
- Joined
- Jan 22, 2007
- Messages
- 269 (0.04/day)
- Location
- Sydney, Australia
Processor | Intel C2D E6600 [380fsb] 3.42Ghz (O.C) |
---|---|
Motherboard | ASUS Commando bios ver.1001 |
Cooling | CPU :ZALMAN CNPS9500 WATERCOOL MOD CASE:120mm LED front,2X80mm exhast |
Memory | A-DATA Vitesta DDR2 800(380mhz) with Pentium 3 HSF |
Video Card(s) | SPARKLE 7950GT DIY HSF with 2X80mm fans oc'ed(core:600 mem:1600) |
Storage | SAMSUNG SP2504C (250GB) |
Display(s) | BENQ FP71G+ 17inch |
Case | icute 0408SL series |
Power Supply | cheap ~_~"" 500w |
Software | FULL OF PORN |
Hey guys I have a problem
I oc'ed my E6600 using 380X9=3420mhz, I set dram to 475mhz(DDR2 950 at 2.2v) and left all the voltage setting on auto. On auto the vcore was 1.5 and vNB was 1.5 the cpu idle=43*C and load=58*C.
I tried 400fsb the CPU starts makin a very high pitch noise and wont allow me to going into WINDOWS so I turn off my pc and restart again use 390fsb the same thing happend but I can go into WINDOWS this time. I tried 380fsb there were not high pitch noise.
What could cause this problem. I have picture for you to see.
I oc'ed my E6600 using 380X9=3420mhz, I set dram to 475mhz(DDR2 950 at 2.2v) and left all the voltage setting on auto. On auto the vcore was 1.5 and vNB was 1.5 the cpu idle=43*C and load=58*C.
I tried 400fsb the CPU starts makin a very high pitch noise and wont allow me to going into WINDOWS so I turn off my pc and restart again use 390fsb the same thing happend but I can go into WINDOWS this time. I tried 380fsb there were not high pitch noise.
What could cause this problem. I have picture for you to see.