WPrime Benchmark

[Kei]

I'm lovin it, makes more sense this way since things are broken down into nicer categories.

Kei

 

[3dsage]

Yeah , nice job CP looks awesome

Looks like my Celery 430 got 4th place on the single core board

 

[p_o_s_pc]

too bad i don't have any single core CPUs other then the P4 to play around with
CP what if i shut off the HT on the P4 then will it be under the single core?

 

[3dsage]

too bad i don't have any single core CPUs other then the P4 to play around with
CP what if i shut off the HT on the P4 then will it be under the single core?

Hmm, that would be a good test. You have a 661 right?


BTW check out what I just got with my E5300 "R0" i did it on a burrowed P5KC (with nasty Vdroop), this cpu might get in the top 20 alongside my E7500

voltage set to 1.45V, bios , cpuz, and everest show 1.375

I cant wait to get my P5E3 DLX back up.

 

[p_o_s_pc]

yes i have a 661 (3.6ghz stock) I am thinking about dropping it in the P35 board and giving it hell(the board supports P4s) but i will have to wait till i get some 1066 ram so i can get the bus speed up high.

 

[3dsage]

yes i have a 661 (3.6ghz stock) I am thinking about dropping it in the P35 board and giving it hell(the board supports P4s)

Cant those 661's hit 4.5GHZ on air, like its nothing?

I was bidding on one recently, but it got to high, so I just stopped myself

Yeah, I hate the fact that im really bus limited on this 800FSB cpu, cause I have some DDR3 on this board that can hit 1800+.

 

[p_o_s_pc]

Cant those 661's hit 4.5GHZ on air, like its nothing?

I was bidding on one recently, but it got to high, so I just stopped myself

i think so. Mine did 4.2ghz on a ECS board with stock voltage cooled by a Tt V1 but wasn't stable for 24/7. So i would say 4.5ghz would be possible with a better board (ECS+610i=Epic fail for OCing) but the ECS board did get my E1500 to 2.86ghz 24/7 stable(crunching 24/7)

my ram i am running in the P35 is some cheap DDR2 400@1.8v that i have running at DDR2 7xx@2.1v

 

[Chicken Patty]

it looks better.I like it this way

I agree

I'm lovin it, makes more sense this way since things are broken down into nicer categories.

Kei

I got tired of seeing the top 50 all i7's in the quad core division!

too bad i don't have any single core CPUs other then the P4 to play around with
CP what if i shut off the HT on the P4 then will it be under the single core?

Thats why I have Single Core with HT and without

Hmm, that would be a good test. You have a 661 right?


BTW check out what I just got with my E5300 "R0" i did it on a burrowed P5KC (with nasty Vdroop), this cpu might get in the top 20 alongside my E7500

voltage set to 1.45V, bios , cpuz, and everest show 1.375


http://i2.photobucket.com/albums/y9/esi-slowboy/18657.jpg

I cant wait to get my P5E3 DLX back up.

Adding now.

 

[p_o_s_pc]

here you go bro i'm in the 19s now. I know i could do better if i took the time to tweak the ram. I could have ran it at 4-4-4-10 at that speed and voltage but didn't take the time to. Also look at the NB speed 3ghz i had it running 3.1ghz but it would BSOD loading windows also 4ghz run wouldn't happen without 1.65v and wasn't wanting to do that. Temps hit ~47c after wprime and ~35c idle

 

[Chicken Patty]

here you go bro i'm in the 19s now. I know i could do better if i took the time to tweak the ram. I could have ran it at 4-4-4-10 at that speed and voltage but didn't take the time to. Also look at the NB speed 3ghz i had it running 3.1ghz but it would BSOD loading windows also 4ghz run wouldn't happen without 1.65v and wasn't wanting to do that. Temps hit ~47c after wprime and ~35c idle
http://i166.photobucket.com/albums/u88/p_o_s_pc/19_95s.jpg

Good job buddy, updated

# P4-630 - Core 2 Duo E7200 395 MHz - 19.780
# p_o_s_pc - Athlon II X2 240 3900 MHz - 19.953
# JBravo - Core 2 Duo E7200 3895 MHz - 20.015

 

[cdawall]

here you go bro i'm in the 19s now. I know i could do better if i took the time to tweak the ram. I could have ran it at 4-4-4-10 at that speed and voltage but didn't take the time to. Also look at the NB speed 3ghz i had it running 3.1ghz but it would BSOD loading windows also 4ghz run wouldn't happen without 1.65v and wasn't wanting to do that. Temps hit ~47c after wprime and ~35c idle
http://i166.photobucket.com/albums/u88/p_o_s_pc/19_95s.jpg

great run but i wanna see you break this

athlon II X2 250 regor core

 

[Chicken Patty]

great run but i wanna see you break this

Just making sure it's on the list

# BATOFF - Core 2 Duo E8400 4203 MHz - 18.36
# cdawall - Athlon X2 250 4235 MHz - 18.438
# 1Kurgan1 - Athlon II X2 240 4050 MHz - 18.490

 

[p_o_s_pc]

great run but i wanna see you break this

i will see what i can do. I think my ram will do about that speed without a problem also. Not sure that i can get the cpu to do that.
I see you lowered the HT and NB speed also. I will see what i can do. I am going to download AOD and K10stat.I have been doing everything in the bios to this point. Time to start setting in windows.What Vcore and NB voltage did you have to run?

 

[Chicken Patty]

i will see what i can do. I think my ram will do about that speed without a problem also. Not sure that i can get the cpu to do that.
I see you lowered the HT and NB speed also. I will see what i can do. I am going to download AOD and K10stat.I have been doing everything in the bios to this point. Time to start setting in windows.What Vcore and NB voltage did you have to run?

I remember lowering HT and NB helped squeeze a bit more out of the CPU itself, which is the biggest change for any benchmark IMO.

 

[p_o_s_pc]

breaking that run isn't going to happen my chip just won't do it.

 

[cdawall]

Just making sure it's on the list

# BATOFF - Core 2 Duo E8400 4203 MHz - 18.36
# cdawall - Athlon X2 250 4235 MHz - 18.438
# 1Kurgan1 - Athlon II X2 240 4050 MHz - 18.490

i need to rerun this thing on DDR3 that was in my old crosshair II board

i will see what i can do. I think my ram will do about that speed without a problem also. Not sure that i can get the cpu to do that.
I see you lowered the HT and NB speed also. I will see what i can do. I am going to download AOD and K10stat.I have been doing everything in the bios to this point. Time to start setting in windows.What Vcore and NB voltage did you have to run?

the chip clocked better with a higher bus speed than a higher multi try that to get it up higher as for voltages i was sitting in the 1.55-1.6v range on the cpu NV was running pretty normal

I remember lowering HT and NB helped squeeze a bit more out of the CPU itself, which is the biggest change for any benchmark IMO.

HT on my chip is around stock and NB didn't want to crank on this chip so i left it were it was stable

breaking that run isn't going to happen my chip just won't do it.

i think you can set it outside and do the run

 

[Chicken Patty]

i need to rerun this thing on DDR3 that was in my old crosshair II board



the chip clocked better with a higher bus speed than a higher multi try that to get it up higher as for voltages i was sitting in the 1.55-1.6v range on the cpu NV was running pretty normal



HT on my chip is around stock and NB didn't want to crank on this chip so i left it were it was stable



i think you can set it outside and do the run

Meh, what I meant by lowering was either slightly below stock or leaving at stock. I remember I tried running mines at 1.8GHz at times. But stock did best.

 

[p_o_s_pc]

I'm not going to push it anymore i don't want to take away anymore crunching/folding time.I also don't want to kill anything as i have only had this rig running for less then a week

 

[Chad Boga]

What temps is an i7-860 supposed to be running on when you do stuff as simple as internet browsing?

My temps are sitting on approx 50 degrees centrigrade on all 4 cores, whether I am internet browsing or just sitting in front of my screen doing nothing.

I am wondering if I properly fitted the stock heatsink, but will be acquiring a Noctura heatsink/fan combo within a week.

 

[Chicken Patty]

What temps is an i7-860 supposed to be running on when you do stuff as simple as internet browsing?

My temps are sitting on approx 50 degrees centrigrade on all 4 cores, whether I am internet browsing or just sitting in front of my screen doing nothing.

I am wondering if I properly fitted the stock heatsink, but will be acquiring a Noctura heatsink/fan combo within a week.

i7 run really hot bro. At least the 920's can go up to 100ºc. To me perfect temps is under 80ºc, but 90ºc is the highest I'll go.

 

[Chad Boga]

i7 run really hot bro. At least the 920's can go up to 100ºc. To me perfect temps is under 80ºc, but 90ºc is the highest I'll go.

I know the Socket 1366 i7's run hot, but I thought the Socket 1156's would run a lot cooler.

I tried the Intel Burn test and my setup failed it and RealTemp was showing that my cores were running as high as 92ºc, that is why I wanted to find out what other people's stock speeds were and why I want to get a good air cooler to replace the intel heatsink/fan combo.

 

[cdawall]

Meh, what I meant by lowering was either slightly below stock or leaving at stock. I remember I tried running mines at 1.8GHz at times. But stock did best.

pretty much what i have been doing

I'm not going to push it anymore i don't want to take away anymore crunching/folding time.I also don't want to kill anything as i have only had this rig running for less then a week

killing things isn't fun

I know the Socket 1366 i7's run hot, but I thought the Socket 1156's would run a lot cooler.

I tried the Intel Burn test and my setup failed it and RealTemp was showing that my cores were running as high as 92ºc, that is why I wanted to find out what other people's stock speeds were and why I want to get a good air cooler to replace the intel heatsink/fan combo.

thats about right for the stock intel HSF the noctua combo will get you much better temps

 

[Chicken Patty]

pretty much what i have been doing



killing things isn't fun



thats about right for the stock intel HSF the noctua combo will get you much better temps

Chad, here is what a good air cooler will do. This thing has been running 100% load non stop for the past month I would say. I don't even stop crunching during gaming. Look at my temps.

It's a little hot in my room right now, the A/C vent was closed.

 

[Chad Boga]

thats about right for the stock intel HSF

But shouldn't I be able to pass the Intel Burn test then, if this is a test Intel does before releasing their CPU's onto consumers?

Chad, here is what a good air cooler will do. This thing has been running 100% load non stop for the past month I would say. I don't even stop crunching during gaming. Look at my temps.

It's a little hot in my room right now, the A/C vent was closed.

What air cooler do you have?

EDIT: I just checked your System Specs

 

[p_o_s_pc]

killing things isn't fun

I don't think you saw this
http://forums.techpowerup.com/attachment.php?attachmentid=31317&d=1260411008