WPrime Benchmark

[loften]

thanks,, oh by the way coodiggy is my little brother

 

[loften]

try 2 did not make it through so i had to up some volts a little.. i did not run any stability tests

 

[Binge]

It's obviously in need of something. For the OC that time isn't good at all Keep trying man and the best of luck to ya!

 

[Chicken Patty]

thanks,, oh by the way coodiggy is my little brother

seen him around here, don't think I ever talk to him on here though. good to know

try 2 did not make it through so i had to up some volts a little.. i did not run any stability tests
[url]http://img694.imageshack.us/img694/6043/better2.jpg[/URL] [url]http://img694.imageshack.us/img694/better2.jpg/1/w800.png[/URL]

Added

It's obviously in need of something. For the OC that time isn't good at all Keep trying man and the best of luck to ya!

yeah you are right.

loften, did you install the libraries in wprime?

 

[jjFarking]

wPrime results

Thought I'd give this a go too

Did some quick testing over the last few days & noticed that RAM speed isn't really important to wPrime. Latency, however, does make a difference.

Guess I'll be testing my system with reduced latency for better wPrime results

 

[Chicken Patty]

Thought I'd give this a go too
http://img340.imageshack.us/img340/4639/wprime3913reducedlatenc.jpg

Did some quick testing over the last few days & noticed that RAM speed isn't really important to wPrime. Latency, however, does make a difference.

Guess I'll be testing my system with reduced latency for better wPrime results

Interesting, thanks for the observation. Your score has been added.

 

[loften]

i just down loaded extracted and installed it.. is there something special to do to make it run any different? a link on to how to configure it or??

 

[Chicken Patty]

i just down loaded extracted and installed it.. is there something special to do to make it run any different? a link on to how to configure it or??

When you install the libraries it actually runs slower at least for i7. Not sure how i5 is affected by it.

 

[loften]

so which wprime should i install?

 

[Chicken Patty]

so which wprime should i install?

I use 1.55 as it's the only one that HWBot accepts, but you can try the newer one which is 2.0. I don't know of any tweaks to this, if there even is any. Just open, and run. Make sure you set the amount of threads to 4 also.

 

[loften]

ok thanks.. i was using 2.0, i will try 1.55 and see if there is any difference on my machine..

 

[Chicken Patty]

ok thanks.. i was using 2.0, i will try 1.55 and see if there is any difference on my machine..

Give it a go and see what's up.

 

[loften]

i ran 1.55 4 or 5 times and it is about a half second slower every run..
on version 2.0 after messing with latencies the fastest time i was able to get was only a few points lower then the one i put up there last.... maybe something is running in my background that is keeping my score from going lower, maybe 750 being 4 threads compaired to 8 thread 860's are just this much slower. maybe my memory sux.. i don't know.. i would like to see some other 750 runs besides the 2 others up there.. someone post some up please..

 

[Chicken Patty]

i ran 1.55 4 or 5 times and it is about a half second slower every run..
on version 2.0 after messing with latencies the fastest time i was able to get was only a few points lower then the one i put up there last.... maybe something is running in my background that is keeping my score from going lower, maybe 750 being 4 threads compaired to 8 thread 860's are just this much slower. maybe my memory sux.. i don't know.. i would like to see some other 750 runs besides the 2 others up there.. someone post some up please..

I wouldn't worry soo much if it's slower than it should blah blah blah as long as the PC performs correctly for what you use it for. However, at least to me it does bother me when it is slower than the average Hopefully more peeps post some runs.


When you did your runs did you set the thread count to 4?

 

[OpethiaN]

okay these r my two rigs!!!
i7 920 @ 3.576 Ghz(170x21) with intel dx58so + kingston 1333mhz ram 2x1gb in dual channel!
wprime 7.109 win xp

e5200 @ 4.169 Ghz (333x12.5) with xfx 650i ultra corsair xms2
wprime 18.594 win xp

 

[3dsage]

IDK but your on your E5200 rig, your 12V rail seems to flux to low its at 10.32V. That cant be good.
Nice runs though, Your right behind my e5300 run.

 

[Chicken Patty]

Nice runs dude, when I get home I'll update the leaderboard. I'm on the phone righ now.

 

[OpethiaN]

no its mobo issue!
im getting stable 12v on intel dx58so with same psu!!!
n thankx for appreciation!!!

 

[Jupiter]

Hey guys nice runs. Just dropping a note on Something i am trying.
I installed Innovation Cooling 7 Diamond CPU Thermal Paste IC7 a
couple of days ago and i just had to share how well this stuff works.
I have lost right at 5c at idle and about 10c on load. I was using
AS5 and had a perfectly nice spread when i removed the water block.
I wanted to share this and maybe be able to help some of you with temps.
Idle = 28-30
Load = 69-72
Ambient = 22c

Innovation Cooling 7 Diamond CPU Thermal Compound

* Mfr Part Number: IC7
* Runs 3.38 Degrees C Cooler than Arctic Silver 5
* Each tube of IC Diamond Thermal grease contains 7 carats of micronized diamond with diamond particle loadings @ 94% by weight.
* Tight particle distributions
* Non Capacitive Non Electrically Conductive
* Silicone free
* Thermal Conductance: 4.5 W/m-K
* 1.5g Tube

 

[Chicken Patty]

Hey guys nice runs. Just dropping a note on Something i am trying.
I installed Innovation Cooling 7 Diamond CPU Thermal Paste IC7 a
couple of days ago and i just had to share how well this stuff works.
I have lost right at 5c at idle and about 10c on load. I was using
AS5 and had a perfectly nice spread when i removed the water block.
I wanted to share this and maybe be able to help some of you with temps.
Idle = 28-30
Load = 69-72
Ambient = 22c

Innovation Cooling 7 Diamond CPU Thermal Compound

* Mfr Part Number: IC7
* Runs 3.38 Degrees C Cooler than Arctic Silver 5
* Each tube of IC Diamond Thermal grease contains 7 carats of micronized diamond with diamond particle loadings @ 94% by weight.
* Tight particle distributions
* Non Capacitive Non Electrically Conductive
* Silicone free
* Thermal Conductance: 4.5 W/m-K
* 1.5g Tube

Damn dude, how you been man? I haven't seen you around here in a a while. Glad to see you stop by and share this info with us.

 

[Chicken Patty]

okay these r my two rigs!!!
i7 920 @ 3.576 Ghz(170x21) with intel dx58so + kingston 1333mhz ram 2x1gb in dual channel!
wprime 7.109 win xp
http://i48.tinypic.com/2upg5jp.jpg

e5200 @ 4.169 Ghz (333x12.5) with xfx 650i ultra corsair xms2
wprime 18.594 win xp
http://i48.tinypic.com/23wo19s.jpg

Updated bro That i7 needs to go higher though bro

 

[Munki]

nvm. Works if I run it as admin

 

[sapetto]

Got my Quad today and i am posting a quick try. Don't know if i can do 500fsb and what voltage i need for 4ghz

 

[Chicken Patty]

I'll add this a soon as I get home

 

[Deleted member 74752]

Phenom 550 BE unlocked