Hi all,
I took a look to all the posts related to the AIW X800VE as I also own one, and I would like to know if I will also be able to unlock some sleeping pipes
I used Rabit as shown on the thread from bilbo248 and here below is the result:
-----------------------------------------------------------------------------------------
-- RaBiT v.2.0.0 build 616 started --
> RaBiT driver v.2.0.2 is ready
-- Your ATi video adapter low level info --
Vendor: 0x1002, SubVendor: 0x1002 (ATI Technologies Inc)
Device: 0x4A54 (R420/M18), SubSystem: 0x4422
CONFIG_XSTRAP.8P_DISABLE = 0x02
On Board EEPROM: ST M25P05/c (64 Kb)
Active pipelines: 4, GB_TILE_CONFIG = 0x00010011
GB_PIPE_SELECT = 0x00030100
CONFIG_DIE_FUSES = 0xFFF33FFF, 8 died pipeline(s)
CONFIG_SUBSTRATE_FUSES = 0xFFFFF99C, 12 disabled pipeline(s)
CONFIG_ROM_FUSES = 0x00000623
CONFIG_REGISTER_FUSES = 0x00000000
-- Memory bus and clocking info --
Memory: 256 bits, 256 Mb
Core clock = 542.70 MHz
Memory clock = 575.10 MHz
-- Active memory timings --
tWL = 1.5
tCL = 3
tCMD = 0 clock
tSTB = tWL
tRcdRD = 7
tRcdWR = 4
tRP = 5
tRAS = 6
tRRD = 6
tR2W = CL + 2
tWR = 7
tW2R = 0
tW2Rsb = tW2R Rule
tR2R = 1
MemRR = 30
tRFC = 20
tRBS = CL + 2
tERST = CL - 2
tQSREQ = CL - 2
tDQM = WL - 1
tDQS = WL - 1
tDQM_Adv = As specified
tDQS_Adv = As specified
-----------------------------------------------------------------------------------------
Does it mean that my card should be able to have 16 pipes enabled ?
As far as I understood by enablind the sleeping piepes (whatever 8,12,16) the core and mem freq. will slow down.
Is it right?
Where may I find (just in case I would be able to unlock some pipes) the necessary material to join the lasercut?
I would be happy if someone of you will help to find out what may I do with this card!
Thanks in advance
FredWizard