Thursday, July 7th 2016
NVIDIA GeForce GTX 1060 Founders Edition PCB Pictured
Here's one of the first pictures of the NVIDIA GeForce GTX 1060 Founders Edition (reference) PCB. The PCB is about 2/3rds the length of the actual card, and despite that, it's pretty barren. Power is drawn from a 6-pin PCIe power connector, however, this connector isn't on the PCB, but is on a receptacle towards the end of the cooler. NVIDIA designed this in response to complaints that on cards with PCB shorter than the cooler, the power connector would be in the middle of the card. It would also block the illuminated GeForce GTX logo along the top.
The 6-pin PCIe power receptacle connects to the card at big solder points. This approach has one downside. If you want to change the cooler (to, say, an aftermarket air cooler), you will have to deal with that ugly cabling. The card uses a simple 3+1 phase VRM to power the GPU, with its TDP rated at just 120W. The GP106 GPU is neighbored by six 8 Gbps GDDR5 memory chips populating its 192-bit memory bus. There's no SLI support. Display outputs include three DisplayPort 1.4, and one each of HDMI 2.0b and DVI.
The 6-pin PCIe power receptacle connects to the card at big solder points. This approach has one downside. If you want to change the cooler (to, say, an aftermarket air cooler), you will have to deal with that ugly cabling. The card uses a simple 3+1 phase VRM to power the GPU, with its TDP rated at just 120W. The GP106 GPU is neighbored by six 8 Gbps GDDR5 memory chips populating its 192-bit memory bus. There's no SLI support. Display outputs include three DisplayPort 1.4, and one each of HDMI 2.0b and DVI.