Greetings All
I'm not new to overclocking but I am new to Intel and asus.
I've found my way here for a modded bios(thanks Ketxxx).
I'm googling for oc bios settings P5Q Pro guide but no luck so far.
Just wondering if anyone has success with 8GB of OCZ reaper 800mhz and a Ketxxx bios?
I'm using the latest bios from asus but I can't boot with 8GB(4x2GB).
The reaper is not on the QVL but before I go through the hassle of rma'ing it and getting some OCZ2P8004GK which is on the list.
Anyone got 8GB working at all?
______________________________________________________________________________________________________________
Here's my Overclock so far...............
CPU Ratio
12.5
FSB
300
PCIE
100
FSB Strap
Auto
DRAM Frequency
800mhz-I'm setting this to match my Memory.
DRAM Timing Control
Auto
DRAM Static Read Control
Auto
DRAM Read Training
Auto
MEM. OC Charger
Auto
AI Clock Twister
Auto
AI Transaction Booster
Auto
Voltages
CPU
1.30000
GTL
Auto
PLL
Auto
FSB Termination
1.30
DRAM
2.10
NB
1.28
SB
Auto
PCIE
Auto
Load Line
Enabled
CPU Spread Spec
Disabled
PCIE Spread Spec
Disabled
CPU Clock Skew
Auto
NB Clock Skew
Auto
CPU Margin
Optimized
I've not Stress tested but it boots into windows and I've run Super_PI (15.xxx).
When I run cpuz it shows my Multi as 6.0 until I run Super_PI,then it goes to 12.5 ?
I've tried FSB 320,it boots but won't load windows.
Back in the day when I oc'd,FSB was King.
200x10 was better than 100x20 is this still the case?
I'm quite happy to achieve 3.75ghz
but 4ghz would be nicer
There's a lot more 'Tweaking options' than I'm used to and I've no idea about most of them
Any Advice,tips,change this,change that etc would be greatly appreciated
_____________________________________________________________________________________
Just tested with OCCT for a 30 min stint,High Priority,Large data set.
Passed ok,max temp on cpu 45,is that Hot?