Recent content by 111frodon

I think you meant pico-joules per bit and not peta-joules...

What Dr4g00n and I are trying to tell you is to put whatever amount of money you desire to spend on the single most powerful (PPD/W or PPD/$ wise, whichever you chose to put first) gpu you can get you hands on. Assuming constant ppd, no multi-gpu setup will ever be as efficient as a single gpu...

More like 1.4 million ppd. My 1070 hover around that mark, sometimes as low as 1.2 and as high as 1.6.

Might as well replace everything while you're at it, unless the cost becomes an issue. If you manage to source correct vram, which is no easy feat...

Anything higher than base clock is using the turbo multipliers. The words used to describe each settings may vary though...

You need the turbo to apply the correct multiplier.

Pm sent

You will probably need to disassemble one of them (assuming they are identical) to check on each individual board for identification.

Your cited text sheds a different light on the situation than this article does...

Seriously, just buy ethereum at this point. Way less risky and a whole lot less trouble to manage! This is coming from a guy owning a GH/s farm. It's been almost a year since I bought any gpu...

This card seems tailor-made for ethereum mining. It is quite similiar to the vega cards in many ways. The core count really doesn't matter (underclocking is the norm), vram bandwidth and tight timings is paramount (hence the hbm) while 8 gb of capacity would be enough for 5-6 years should the...

Or let's say a rice grain weight 1 gram and is worth 10000$. You must pile up 125 tons of rice to match it's wealth. And remember, every grain is worth 10k$...

Stay in afterburner. It should allow you to customize what you need. Start with a customs fan profile and work from here. This card is one of the best space-heater you can find, so it will always run on the hot side, but the performance it can deliver considering it's age is remarkable. Great...

Normal fluctuations here, at least for some weeks. Nothing worth mentioning.

If money is tight, then just bake the card. Remove everything you can on the pcb, put it on a biscuit sheet, silicon chip dide up and on four small standoffs (small aluminium foil balls is what i use). Leave 10 minutes in a 375 °F pre-heated oven. Let it cool to room temp before trying to...