Recent content by Dar1usElite

Yeah I seem to be in that weirdly bad category for the sub timings. Like I said I can do 16 19 19 19 56 and it won't crash in games or benchmarks. I think I'll just tinker with it and accept it will throw some errors. I had it down to the low 58ns range, not sure if it will go much lower.

Yeah it seems that way.

I did have it at 1.4 originally. I think I upped it thinking it would help stabilise it.

i thought 6/8/24 was stable, but it didn't end up being stable, sometimes it would pass 20 runs, sometimes it wouldn't. ill try 20/10 but yeah cjr is kicking my arse. it randomly decided it didnt want to remain stable at 16 19 19 19 56 despite passing 20 runs in the past. Im pretty sure i...

Sorry for the delay in replies ive been flat out... Tried lowering the trfc below 496 and i got errors scl's of 4 gave me errors (i cant remember what they were exactly, i can go back and re run the test to find out). And the current screenshot is of the run where i adjusted the wr/rtp values...

Yes... Lowering tRFC beyond 496 gave errors I'll have to check about the others.

OK so this made no difference it was still unstable at 4/12/24

i changed only the wtrs/l values to 4 and 12 and got 2 errors, is this supposed to be changed in conjuction with something else?

alright cheers ill give that a crack later tonight. I just get confused about rules. The only one i vaguely remembered was that tfaw is meant to be 4x trrds

Bit of an update. It had 3 errors with trrds/l 4/6 and tfaw of 16 so i backed it off to 6/8 and 24 respectively and it passed 20 runs with no errors. I don't know if its worth trying to go any lower or not, what do you think @Taraquin ? I've only changed the primaries, TRC, TRFC. TRRDS/L, TFAW...

did a little more tweaking @Taraquin , got it down to the 59ns range on aida and in the 15800 range on r23. ill start tweaking those other timings soon

Alright so try trrds = 6, trrdl = 8 and tfaw = 24? Im genuinely suprised it passed with 16 20 20 20 36 56 to be honest... i dont know if i can get the primaries much tighter than that. Ill try tightening the trfc down to one of the values you said above and then ill try tweaking the sub timings...

ok this is weird. It passed 20 runs with no errors on these timings.. I think i set the primaries, the trc and trfc and 1t with gdm enabled and the rest is on auto @ 1.4v.

I'll try that after. I did what you said with auto on everything and 18 22 22 22 40 and it's 6 runs in @ 1.4v and no errors yet TRFC of like 666 on auto though TFAW 40, tRC 89, trrds/l 8/11.. I'll post a zen timings screenshot if it passes.