Recent content by Finnedsgang

I changed 4 memory kit, all same issue. I also checked with memtest86 the kit, and no issues were found. I think the mb was faulty. I also found that gigabyte released a v2 of the same board, maybe to fix this issue . I didn’t checked the other option you listed, but now it doesn’t post...

2x16gb gskill memory 6000mhz with expo (trident z neo rgb)

I ended up returning the Gigabyte X670 Gaming x AX as the problem of the memory was getting worst. After the latest shut down, the mb didn't boot up anymore, also resetting cmos, upgrading bios with qflash ecc. I need a new MB for my 7900x, any suggestion on a mb that doesn't have the same...

I believe you, absolutely, just sound a pity to buy super fast memories and than using them at low speed, for a problem I suppose is amd related , right ? Not motherb brand related

You are not using expo means that you use the same settings manually, or simply leave the clock to the standard ones ?

In my case every reboot it’s 1 minute or more. Every reboot. My settings with 7900x and gigabyte x670 gaming x ax are everything on default and expo profile at 6000mhz for the gskill trident z neo rgb. And if I try to update the bios, the reboot fail and the computer doesn’t post for three times...

I had the same problem for a while then I switched to gskill memory specifically listed in the support of my mb (gigabyte gaming ax v1 rev 1) and I thought I almost “solved” with 1 min and 35 sec at every cold reboot… then I had the idea to update the bios for a Memory Management BSoD I was...

Using a vcore soc voltage of 1.25v and disabling memory context resulted in about 2 minutes to boot (135 seconds to be precise) I didn’t change the settings of the voltage for the dram, everything is controlled by expo. I’ll try with manual voltage for the dram, but what settings I have to use...

Trying with 1.2v vcore soc and memory context on enable, and is the second time posting, but after 60/90 seconds. It’s already something … p.s. I’m on bios f9.d for my mb

(thanks for the reply) @AusWolf i also tried to Set the vcore Soc from auto to 1.115 but nothing change

Hi, I’ve the same problem with my pc running 7900x and ddr5 from gskill at 6000mhz cl36 (trident z neo rgb) officially supported in the memory list. Sometimes don’t even post, I have to shutdown and reboot, but when I simple reboot it doesn’t do anything with two leds on the mb flashing . I...

I made two things: I removed the riser cable (I had a pcie4 riser for the vertical mount) and lowered the ddr5 to 4800mhz instead of 6000, as I found some instability on the ram. The score is now 25600

This is from afterburner. I don’t know why if I make the screenshot directly from the app, the data are wrong …

You're absolutely right... my mistake (i was thinking at the other PC i have with DDR4 :D) these are the ram CORSAIR VENGEANCE RGB DDR5 32GB 2X16GB 6000MHZ C40 1.35V CMH32GX5M2B6000C40, (i fixed in the first post) This is the PSU BeQuiet PowerZone 1000w https://www.bequiet.com/en/powersupply/384

Hi Everyone guys, I need help with my new GPU, a KFA2 4090 SG 1clickOC. I just installed it on a recently formatted PC (down below the spec) and I noticed that the score in Port Royal is under the average: 21800 I tried to configure the card in NCP but nothing worked. Vsync and Gsync are...