I have the Kingpin hybrid bios flashed to my 3090 gaming x trio. Simply went and downloaded the latest EVGA Precision x1, updated bios from within the software. Bingo, BAR supporting fully working.
links to all parter boards below:
just a quick heads up in case anyone was not aware.
Gigabyte have enabled resizable BAR support on z390 motherboards. (At least for the z390 ultra that I have checked)
I have a Gagabyte Z390 Aorus Ultra motherboard and the latest bios F10h now has this support...
If AMD are going to compare a 6900XT with rage mode (overclocked), surely they should compare it to an overclocked 3090 for a fair comparison.
Or just not use rage mode. Cant get a proper idea of performance, although they "are" just slides.
Need a proper game-off between these two cards
Im about 50-ish percent into the game. Heavily populated areas I get short drops into the 80 fps range but for the most part its a pretty nice range between 90-100fps. I do have motion blur off so Im not sure if that could be affecting anything (Although its usually an fps boost having it enabled)
FPS scores look "off" for a 2080 ti?
2560x1440 scores look too low for a 2080ti. I'm gaming at 3440x1440 with a single 2080 ti and 9900ks and at max settings pulling 90-100fps with FOV at 90.
Only when adding a reshade do I see fps drops into the high 70's
Just to throw in my experience.
Maximus XI Hero board and 9900ks.
Not went above 1.4v but able to boot into windows at 5.5GHz
Can game at 5.4Ghz with avx set to zero. (Only tested Outer Worlds so far) and temps sit around 45-55 during the gaming session. So far this chip is excellent compared...