Recent content by masterdeejay

Success. Native glide support on Windows11 x64. Modded windows 2003 x64 drivers. Voodoo2 Next dosbox-x glide api passtrough.

That is only the bios signature lock, but not the falcon lock in the GPU. It only allows cross-flashing of vendor bios. The P102-100 is programmed to use 1x, not with bios but with the integrated falcon fw. Imagine it like with CPUs — the difference between a regular i7 and a K version is only...

My oldest i think with my 386 with a new case. There was a connector for the front digit display — a Molex to 2-pin. Since there was no pinout diagram for the front panel, I connected the HDD LED, power LED, and other connectors randomly. Somehow, I accidentally connected the 2-pin power cable...

A770 is very good at raytracing at that class. Cyberpunk runs well on that card! RT ultra but not PT (it was on my old pc) With mods. The card needs REBAR support and a good CPU to run well.

Success but with the 10980HK ES. Not working: TPM and secure boot, i think it is because the disabled ME Now i use it with 16+2x8GB ram at 2666. IGP works, uefi works. No overclock yet, just 4600mhz all core turbo. Bugs: After any bios setting is touched and saved it is not starting until i...

My build for core2 Vista build. E6850 (no need for quad for that era games) 2x1GB OCZ Reaper (1066mhz) Quadro FX5500 (like a GeForce 7900 GTX 1GB vram but lower clocks) Abit IP35-Pro The pentium4 XP build: Abit IC7, P4 3ghz HT, Leadtek A280le (ti4200-8x), 4x256mb ram And i have Abit IS7 and...

9400F somehow not working but the i9 10980HK works. Still have some problems. After saving the bios, it is not starting until a cmos reset. working on it! (i think i forgot to clean the nvram when i modded the bios)

This is a work in progress mod. Z170A GAMING PRO CARBON (minor fault: the cpu fan connector is not working) ~18 usd. Rich features, usb3.1, good lan and audio...for this price! For testing i have a pentium gold g4560 and bought a cheap i5 9400f for the modding (~29 usd) That is a nice cool cpu...

UPDATE TDP set to 65W my daughter got it for a light gaming pci with a cheap Sapphire nitro RX570, 2x8GB ram, 500GB SSD... just for minecraft and another light games... zero instability! Very cool and quiet (with an old Thermalright extreme ultra 120 tower cooler at fixed 5v 12cm fan. Runs...

After a successful coffeetime mod (H110 and 10gen i9 cpu) i bought a very cheap Z170A GAMING PRO CARBON (minor fault: the cpu fan connector is not working) ~18 usd. For testing i have a pentium gold g4560 and bought a cheap i5 9400f for the modding (~29 usd) It will be another fun low budget...

That is Sas (port) to Sata (drive) but i have the Sata (port) to Sas (drive) version.

I want to know what controller is on that active adapter but the chip has no label. Why hasn't it been solved until now? It is somehow translate the sata commands to sas and it works.

https://www.aliexpress.com/item/1005007946063328.html

Sata to sas adapter from AliExpress. Now i can use my old sas drives, i dont need to use a pcie controller. Tested, can boot. Dont know what controller it has. No markings.

I have found the balanced settings for my 9800x3d. I don't think that a 0-1% performance worth the risk. I set most of the settings to manual because auto can cause unnecessary overvoltage. Cooling with a custom water loop 1080 size rad without any fans, just the pump. PSU is also in passive...