Recent content by Spliff

HIS 3850 512M DDR3 @ 810/927 Cpu: E2180 @3.52Ghz (8x440) Stock GPU cooling for now.. :toast:

Hey all. I did a little VMod back in december to 1.35/2V from 1.23/1.78. Freq: 960/1120 Here are the results from then: 3dMark05: 13.353 3dMark06: 6.189

Nice to see some fresh info here :) Any opinions on the 7.11 divers? A properly translated version of the pencil mod would be nice, the work can be started here ;)

Sapphire DDR3 has 1.4Ghz mem, DDR4 2.2Ghz. However, ram quality is like a lottery, hence the RAM OC results can vary a lot. GPU should clock to 900-910Mhz.

Its not 4.4Ghz, I'm running 8x multiplier instead of 10x so it's 3.55Ghz :) Card running at 920/1090; can't get higher clocks stable with both GPU and RAM OC'ed.. w8ing for that damn VMod... :rolleyes:

Here are my newest results :rockout: 3DMark06: 6.012 3DMark05: 13.100 PT, /update me plz.

880/1090: 3DMark05=12.330. Surely your problem is related to CrossFire configuration.. I think ATI has a lot of work to do on their CS drivers.. Try it with a single card.

I replaced the faulty cooler, applied some silver grease and added an extra fan in my case. The 100% stable&arifact-free new clocks are: 920/1090. 3DMark05: 12.724 3DMark06: 5.930

Max stable & artifact free clocks: GPU(mem def): 930gpu/700mem MEM(gpu def): 800gpu/1110mem Seems to me like max mem freq is limited by the memory controler in the GPU, not the RAM chips. So, the final stable freq are: 920GPU/1060MEM. 3DMark05: 12.493 3DMark06: 5.878

I've hit 1110Mhz on my VRAM adn I think it could go higher, but something's limiting the clock, just like with the GPU. 1110Mhz seems to be 100% stable, 100% artifact free, but when I try 1120 I get blank screen and freeze. Maybe I was rushing a bit in the heat of the moment when I said...

Like I said, atiflash tools dont work 4 me.. The windoz version says it cant read the ROM. PT, You got 8 chips? I got 4x HYB18H512321BF-14.

I would upload the bios but the file that atitool dumps does'nt look like the vga bios to me.. Ati flash tools cant read the rom.. If you got others suggestions they are welcome. The ram chips say Qimonda 1.4ns, 1.8V. I found the Vram info here. They also have the 2V version of this chip...

Sapphire ownz :) Just got a brand new card identical to mine, but with a newer bios from august 2007. This card seems to do 960 GPU / 1100 MEM. Yes, it's DDR3 version :rockout: I'll start stabilitiy & artefact testing later on.

Lose the "" or put params outside of them "..." -eng=....

Just create Your own shortcut to AMDGPUClockTool.exe (right-click->create shortcut) and add to target the params: <space>-eng=xxx -mem=xxx