Recent content by tanaka_007

Yes, this is just a list of hardware specifications. For example, with a 6-phase VRM switching frequency of 800KHz and an 8-phase VRM switching frequency of 400KHz, the latter has inferior transient response, so the ranking is meaningless. VRM switching frequency setting in BIOS affects the...

*For APU When purchasing a motherboard from now on, we recommend a motherboard with 2 DIMM slots if you will only be installing 2 pieces of memory. DDR5-8000+ can often be run on a 6-layer board with 2 slots. If you have a 6-layer board with 4 slots, you may not be able to run DDR5-8200+. (Same...

Someday someone will try something like this. RTX4090 (MSFS 4K 60fps / DLSS 120fps) -> 7600G iGPU (AFMF Upto 240fps) -> Monitor *Assign game EXE to dGPU and output the video from iGPU.

iGPU is not affected by XGMI Link (FCLK), so higher MCLK are better. [CPU 7000] CPU die---(FCLK,XGMI link on CPU PCB)---I/O die(UCLK,iGPU)---Memory(MCLK*2=DDR) MCLK3200:UCLK3200:FCLK2000 (DDR5-6400, Low Latency) [APU 8000G] CPU+I/O(FCLK,UCLK,iGPU)---Memory(MCLK*2=DDR) MCLK4200:FCLK2400...

For Windows, change the power plan settings. If you want to use a batch file, please refer to the sample below. https://learn.microsoft.com/en-us/windows-hardware/customize/power-settings/options-for-perf-state-engine-maxfrequency ### Clock_Limit.bat ### @Echo off cls echo Change Max Clock...

Voltage is constantly fluctuating. When a load is applied, the LLC counter causes the voltage to rise. [A] fluctuates greatly, and [C] hardly fluctuates. is the composite voltage of [A] and [C], not the actual sensor voltage. If you want to know the true voltage, use a tester to measure the...

For example, when using Hynix A-die DDR5-5600 1.1v to OC for DDR5-9300 1.8v (Async), it needs to be water cooled with a 2DIMM slot M/B. 6000+ 1.5v (Sync) should be fine with 4DIMM slot M/B and air cooling. *Except for unreasonable timing settings or insufficient voltage. *2DIMM Slot M/B + Hynix...

Not sure if these motherboards support Ryzen 8000 and 9000 series FCLK2500MHz+ (DDR5-7500+), 7000 series FCLK2000MHz(DDR5-6000+) will be enough. Typically you can run DDR5-9000+ with 2 DIMM slots and DDR5-7000+ with 4 DIMM slots. *7300+ is not possible with 4DIMM slots. *DDR5-5600(1.1v) Hynix...

higher number of threads, easier it is for code to overflow from L3. Most games increase number of threads they create with number of CPU cores, which may not be appropriate for 2CCD. In case of 7950X3D, it is because threads are pushed into 8 cores. In CCD0 Mode (Disable CCD1), the game will...

A 2DIMM motherboard is required if you want to increase memory clock in 1:2 mode. It would be interesting to look for DDR5 modules with Hynix chips in shops and on eBay etc... For example, a Hynix DDR5-4800 8GBx2 kit (Green PCB) works with DDR5-6000 Add a heatsink if you want to OC DDR5-7500 or...

Heats up when certain pins become unbalanced. It is necessary to check with a tester whether solder cracks have occurred inside.

It seems that behavior of power plan has changed in Windows 11. If the CPU usage does not reach 0-1% when idle, we recommend stopping various background tasks such as widgets, weather, news, slideshows, thumbnail creation of My Pictures, etc. (If you're not using it) I tried adjusting various...