Recent content by userdmn

A bit late but.. new drivers are out.

I bought my monitor second hand at the beginning of 2012, the previous owner used it for almost 2 years, in 2023 it started to have problems, it stopped working a few months ago and I managed to save it, now it works perfectly. model? W2486L, savage edition hehe

I will try to see what results I get with the bios of a Vega 64 plus oc, probably 4300 in superposition, I hope the power supply works well.

Hi, my first try

happy with these temps, 45c max omg (room temp 19c), im using the stock bios, stock clocks, 150w limit. It is a little difficult but not impossible to adapt a CPU cooler to GPU. this thing was burning months ago, like 86c. @DAPUNISHER Nice pc, thats demand a big gpu, you can upgrade the psu...

Time to share this, finally fix my gpu (vega 56) temps some days ago, max is 60c in heavy demands, vrm hmm 60, 65c, room temp 25c, non-use gpu temp 27c. pd: cooler model is coolmoon t500. raw fotos

today i tried with thermal adhesive on the sides and thermalpad in the center, games that used to run between 55c and 65c are now going over 80c... i think the next step is to go back to how it was, at least it worked, advice.. you cant play to much with these vapour chamber, they bend easily.

Hi, the vapour chamber was lapped in both sides, i will try to get those thermalpads, thanks, currently my gpu is using coolermaster "ic essential e1".

Too bad there isn't an editor for vbios vega, we would have had a quick solution by having a low consumption vbios. The mod that I made with thermal adhesive works but in demanding cases the temperature rises to the clouds, on contact you can feel a lot of heat on the aluminum, until now the...

@delshay exactly, this thermal adhesive has low heat transfer or wm/k. Works but im using the 150w bios plus undervolt, not bad tems either.

Mods..

@delshay Hi, can u help me, what are the specs of these caps called 150 c83 in the board? I want to replace them, this is an EX-mining card and this suffer coil whine, then a want to replace the inductors, r19 and r22. Thanks!

I am waiting for a new thermal paste, at the moment I cannot benchmark and confirm temperatures because the one I am using only lasts a few hours, it is from an expired batch.

@delshay You need to cut 4 pads, sanding (adding a bit of water) 15m per one, 1hr total, then i use a polish compound, 5 minutes. I also didn't know what to use to polish and ended up using this lol Pic https://ibb.co/N9qyLCf

great improvement, today I did the "heatsink lapping" and the temperatures dropped a lot, in farcry6 (at Medium settings) I had temperatures of gpu 72, hmb2 73, and now I was amazed because I played about 30 minutes at gpu 52, hbm2 54, we are talking about a reduction of 20c! Before and after