• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Patriot Wildfire SATA 6 Gb/s SSD Smiles for the Camera

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
47,675 (7.43/day)
Location
Dublin, Ireland
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard Gigabyte B550 AORUS Elite V2
Cooling DeepCool Gammax L240 V2
Memory 2x 16GB DDR4-3200
Video Card(s) Galax RTX 4070 Ti EX
Storage Samsung 990 1TB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
Patriot Memory displayed its latest line of consumer SSDs in the 2.5-inch form factor, the Patriot Wildfire. The SSD uses the latest SATA 6 Gb/s interface, and is available in capacities of 60 GB, 120 GB, and 240 GB. Wildfire could use any of the many SATA 6 Gb/s compliant SSD controllers out there, the most notable being SandForce SF-2582 and Marvell 9174, to provide transfer speeds in excess of 500 MB/s.



View at TechPowerUp Main Site
 
all of them use same chip, ocz-corsair-adata-gskill-and patriot they give same results
 
They haven't in the past and won't now either.
 
The fastest ssd's nowadays dont use SATA II right?
Would it make a difference?
 
The fastest ssd's nowadays dont use SATA II right?
Would it make a difference?

That depends on what you mean.
 
Sorry When I said Sata II i wanted to mean Sata III or 6 gb/s. I just saw the new ssd's from ocz and they are really fast but I dont know if its for the sata III or for the new controller, probably both
 
Sorry When I said Sata II i wanted to mean Sata III or 6 gb/s. I just saw the new ssd's from ocz and they are really fast but I dont know if its for the sata III or for the new controller, probably both

SATA III is 90% a new firmware. The connectors are exactly the same. Any HDD built for SATA III will work in older SATA connectors; however, if a SSD claims anything above 300 MB/s throughput will not get those numbers when connected to a SATA II. At best, the same drive will max out around 285 to 290 MB/s. This fact is the main reason most new drives say "maximum continuous throughput".....that and there are never any guarantees.
 
Back
Top