ECS Intros CDC-M Micro-ATX Cedar Trail Motherboard

[btarunr]

ECS introduced a new Intel Atom "Cedar Trail" motherboard in the micro-ATX form-factor. The board only slightly steps out of the size specifications of mini-ITX (measuring 190 x 170 mm), yet it wouldn't fit in most mini-ITX cases. The board draws power from a 24-pin ATX power connector. It is driven by Intel Atom D2700 dual-core processor clocked at 2.13 GHz, with HyperThreading technology enabling 4 logical CPUs, and TDP of just 10W; and Intel NM10 chipset.

The CPU is cooled by a chunky passive heatsink.It is wired to two DDR3 SO-DIMM slots, supporting up to 4 GB of single-channel DDR3-1066 MHz memory. Expansion slots include one each of PCI-Express 2.0 x1 and legacy PCI. Storage connectivity includes two internal SATA 3 Gb/s ports. The rest of the connectivity consists of 6-channel HD audio, gigabit Ethernet, serial/COM, eight USB 2.0 ports (four on the rear panel, four via headers), and PS/2. Display outputs include DVI and D-Sub. It is priced at a juicy 7,280 JPY (US $89).



View at TechPowerUp Main Site

 

[Completely Bonkers]

I see VGA not DVI out. DVI dual link out would have been a much better offering. Shame!

Form factor? I think the 2-expansion slots, smaller than uATX but bigger than m-ITX was called FlexATX.

 

[btarunr]

I see VGA not DVI out. DVI dual link out would have been a much better offering. Shame!

DVI is part of the standard feature-set, only not shown in that picture.

 

[TheLostSwede]

Looks like a DTX board to me...
I guess they have two SKUs as well, one with DVI, one with HDMI.
Dual-link DVI isn't going to happen though, as the D2x00 series is limited to a maximum resolution of 1920x1200 over DVI/HDMI