• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

[Case Gallery] Fishie v.2

T

Tory

New Member
Joined
Jul 16, 2005
Messages
337 (0.05/day)
System Specs
Processor Athlon 64 X2 3800+
Motherboard Biostar TForce 6100
Cooling Freezer 64 Pro
Memory 2GB G.skill DDR400
Video Card(s) 8800GTS
Storage 500GB Raid 0
Display(s) Sceptre 20.1inch wide 8ms
Case Ultra Aluminus
Audio Device(s) Audigy 2 value
Power Supply Seasonic 430w
To view this case mod, go here.



Specs:
System Specs CPU: Athlon64 X2 3800+ Motherboard: Biostar Tforce 6100 Graphics Card: 8800GTS 640MB Memory: 2GB g.skill DDR400 Hard Drive: 2x 7200.10 250GB RAID0 Optical Drive: Samsung SH-182D Power Supply: 430W Seasonic Display: Sceptre 20.1 WS 8ms Case: Ultra Aluminus Sound Card: Audigy 2 value Mouse: Razer Diamondback Mouse pad: XTrac Ripper Keyboard: Aspire Turbocase Green Cooling CPU: AC Freezer 64 Pro Graphics Card (GPU): Stock Memory: Red aluminum heatspreaders Case: 2X120mm Auto Temperature Regulated Other: 120mm temp regulated in PSU Temperatures CPU - Idle: 40 CPU - Load: 50 Speeds CPU Stock: 2.0Ghz Overclocked: 2.6Ghz 1.425v Memory Stock: 200Mhz Overclocked: 240Mhz Memory - Timings Stock: 2.5-3-3-6 Graphics Card - Core Stock: 500Mhz Graphics Card - Memory Stock: 800Mhz Benchmarks 3DMark06: 7753

This rig is nearly noiseless when idle, and under load, all case fans automatically increase RPM to keep the temperature and noise reasonable.
 
Last edited by a moderator:
Awesome

Clean, blue, clean and cool :D

Did i mention clean?

Im not a fan of the front of the case, but at least its nice and roomy :)

9!
 
Nice, 8/10 from me !
 
Build by an expert :P
9/10
 
10, nice, clean, dx10 build.
great job Tory!


chris
 
Nice. But why did you put a hole in the side of the case? Since you are on legs... you could have put the hold in the BOTTOM of the case. Would have looked much tidier. :(

Otherwise, good job!

Also, separate your HDD's by another slot for improved cooling of the HDDs. Currently, they are cross radiating.
 
Completely Bonkers said:
Nice. But why did you put a hole in the side of the case? Since you are on legs... you could have put the hold in the BOTTOM of the case. Would have looked much tidier. :(

Otherwise, good job!

Also, separate your HDD's by another slot for improved cooling of the HDDs. Currently, they are cross radiating.
Click to expand...

I didn't put that hole there... it was premodded :(
 
You must log in or register to reply here.
Back
Top