• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

MSI Unveils 970A-G43 Entry-Level Socket AM3+ Motherboard

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
47,684 (7.42/day)
Location
Dublin, Ireland
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard Gigabyte B550 AORUS Elite V2
Cooling DeepCool Gammax L240 V2
Memory 2x 16GB DDR4-3200
Video Card(s) Galax RTX 4070 Ti EX
Storage Samsung 990 1TB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
MSI rolled out a new value socket AM3+ motherboard, the 970A-G43. Based on the AMD 970 chipset with SB950 southbridge, the ATX form-factor board covers all the essentials for a single graphics card gaming PC build, on a tight budget. It uses a simple 5-phase VRM to power the AM3+ socket. The board uses an all solid-state capacitor loadout, by saving on MOSFETs. The CPU VRM uses inexpensive On-Semi DPAK fare. The socket is wired to four DDR3 DIMM slots supporting up to 64 GB of dual-channel DDR3-1866 MHz memory.

Among the expansion slots are a PCI-Express 2.0 x16 (wired to the 970 northbridge), a PCI-Express 2.0 x16 (electrical x4, wired to the SB950 southbridge), and two each of PCI-Express 2.0 x1 and legacy PCI. Storage connectivity is care of six SATA 6 Gb/s ports supporting RAID 0/1/5/10. A couple of 2-port USB 3.0 controllers wired out four ports, of which are two are given out by a standard front-panel header. Completing the package are 8-channel HD audio (Realtek ALC887), gigabit Ethernet (Realtek 8111E), and a handful of USB 2.0/1.1 ports. The board is driven by AMI UEFI BIOS. The 970A-G43 is priced at $89.99.



View at TechPowerUp Main Site
 
Last edited:
  • Like
Reactions: 7mm
Niko-sem vrm rules ! Oh ! No vrm Heatsink ! ... damn !
 
+ the price is too high for an entry level motherboad.
 
No vrm Heatsink?, is ok for me. My GA-870A-USB3 is working fine.

Price?, to high :(

But, is good see a USB 3.0 internal header.
 
There are holes and alignment marks for VRM heatsink why bother with that then cheap out on $1 worth of aluminum ? OH WAIT ITS MSI this explains everything.
 
Can't wait for people to buy this and blow it up with a stock Bulldozer chip thanks to the worst, hottest type of MOSFETs you can buy and no heatsink.
 
No real VALUE board has MOSFET cooler. Really, guys?

This board barely does Crossfire, even. if you buy this to OC, you've made a big mistake, however, I don't think it'll do that badly, honestly.
 
I'm not into overclocking anymore, so I wouldn't buy an AM3+ board new. Refurbished and used, but not new.
 
I ran overclocked CPUs on one of these for years with no issues at all:

83226_2245_draft.jpg


Overclocked better than my MSI P45 Platinum, in fact, using the same Q6700.
 
Reg: VRM, there are two sets of up/dn FETs per phase. So the load (and in effect, heat) is spread that way.
 
VRM and overclocking

Hey Guys, After reading this post I was scared that my mother board would blow up or something terrible, lol
I went out and bought heat sinks for my 970A-g43 , I have a KDM 875 watt power supply with 16 gb ddr3 an FX-8150 overclocked to 4.3 gigs. I am also overclocking my GTX 560 to 990 on the core with voltage adjusted on both the CPU and GPU. Very stable.

I know there are more choices out there then this board. Don't get me wrong I have a few.
But since this article I have been putting my fingers on the VRMs to check the heat. (I do have a water-cooler on the CPU). So I can slide my hand right in there. Never gets hot at all.

I play tomb-raider 2013, SWOR, Bio-shock and deadspace3.

I have a back up board in case something goes wrong. But if I don't post here... That means all is well.:toast:
 
still have the board no issues......
I do notice the north bridge gets warm. but that is normal with most boards overclocked.

I may upgrade but this board is still working overclocked.
 
Back
Top