- Joined
- Mar 21, 2009
- Messages
- 246 (0.04/day)
- Location
- New York
| Processor | Intel 2500k @ 4.5ghz |
|---|---|
| Motherboard | ASrock P67 Pro 3 |
| Cooling | CM 212+ |
| Memory | 8GB Mushkin DDR3 1600mhz |
| Video Card(s) | GTX 970 |
| Storage | Crucial M4, Caviar Black |
| Display(s) | SyncMaster 2443BWX |
| Case | Deep Silence 2 |
| Audio Device(s) | Onkyo Wavio SE-200PCI LTD |
| Power Supply | Coolermaster V700 |
| Mouse | Steel-series Sensei Raw |
| Keyboard | Ducky with Cherry MX Brown |
Hello everyone,
A couple months ago I built a budget computer using an A10-5800k and was wondering about the temperature readouts HWmonitor and OHWmonitor have given me (~45C idle and a high load). The processor is running at the default voltage and frequency and its temperatures seem unnaturally high. Also I am using a deneb Phenom 2 955 cooler on it (with the copper heat pipes) and this made no difference. Previously I had been using the stock cooler that came with it. I have tried to underclock/volt it but the temperatures do not seem to change.
The computer is perfectly stable and has been stress tested with p95.
So anyway I was thinking the temperature sensor must be bad, and was wondering if anyone had any opinions.
A couple months ago I built a budget computer using an A10-5800k and was wondering about the temperature readouts HWmonitor and OHWmonitor have given me (~45C idle and a high load). The processor is running at the default voltage and frequency and its temperatures seem unnaturally high. Also I am using a deneb Phenom 2 955 cooler on it (with the copper heat pipes) and this made no difference. Previously I had been using the stock cooler that came with it. I have tried to underclock/volt it but the temperatures do not seem to change.
The computer is perfectly stable and has been stress tested with p95.
So anyway I was thinking the temperature sensor must be bad, and was wondering if anyone had any opinions.
