ok small update
yesterday i wired up the fans for the quad rad. this seems like an easy task but holy smokes is it difficult with all black wires! it took me almost 2 hours to complete one side of the rad. of course i didnt get the wiring right on the first try so i had to desolder and then wire again. thankfully i got 3/4 right.
The second side took a little less time to complete and, this time i got it right! unfortunately i did a much better job on this side so now i had to redo the other side. and wouldnt you know, i'm out of the proper shrink ughhh so more of thats on the way and then ill take pictures of the finished product!
since i also miscalculated how many fittings i would need, i had to order those as well. nothing like spending 7 dollars in shipping for a 6 dollar fitting!
so in the mean time i decided to tackle the cable management of the back side. i love the clean wire management that many of you all implemented so i did my best at routing and securing.
heres all the wires from the front panel, the sata data and power. Also the pump wire, and the top rad wires. soooo many wires!
and after much manhandling heres how it looks now
wide view of the front panel, sata, 24 pin, 4 and 8 pin cpu
4 and 8 pin cpu
24 pin
Thats it for now!, until my fittings arrive im going to resleeve (again) the led panel wires. sleeve and possibly extend the front fan wires. sleeve and extend the rear fan wires. reshrink the front panel connectors.
thanks!