Hi Wizzard
I have a suggestion for another option regarding fan control for future versions of ATI Tool. Would it be possible to have an option which only comes on in 3d mode, where the fan can be set to regulate itself to try and achieve a set temperature.
I.E So once ATI Tool determines a 3d application is running, the fan can be set to try and achieve say a 75C temp at all times. I know this can be done at the moment carte blanche for both 2d and 3d modes, but it cannot distinguish between the two.
The problem with this is - if I set the fan to try and achieve 75C gpu temp - when in 2d mode it means my fan reduces to about 2% in order so that the gpu heats up to 75C - whic of course is not wha tyou want.
I have a suggestion for another option regarding fan control for future versions of ATI Tool. Would it be possible to have an option which only comes on in 3d mode, where the fan can be set to regulate itself to try and achieve a set temperature.
I.E So once ATI Tool determines a 3d application is running, the fan can be set to try and achieve say a 75C temp at all times. I know this can be done at the moment carte blanche for both 2d and 3d modes, but it cannot distinguish between the two.
The problem with this is - if I set the fan to try and achieve 75C gpu temp - when in 2d mode it means my fan reduces to about 2% in order so that the gpu heats up to 75C - whic of course is not wha tyou want.