AnnCore
Staff
- Joined
- Apr 23, 2005
- Messages
- 312 (0.04/day)
- Location
- Neuchâtel, Switzerland
| Processor | AMD FX-8350 "Vishera" |
|---|---|
| Motherboard | Asus M5A99X EVO |
| Cooling | Noctua NH-D14 |
| Memory | G.Skill DDR3 2133MHz 16GB |
| Video Card(s) | CrossfireX Asus 5850 |
| Storage | Crucial C300 128GB |
| Display(s) | Samsung SA950 |
| Case | Coolermaster Storm Sniper |
| Power Supply | Corsair AX850 |
| Software | Windows 7 Ultimate 64 bit |
To view this case mod, go here.
Specs:
ABIT NF7-S ver 2.0 nForce 2, AMD Athlon xp 2400+ 1.70v @ 2104.8 MHz, 2x 512 MB Kingston HyperX with FSB @ 200.4 MHz (400.9 MHz Dual-channel), ATI X850XT @ 520/540 MHz, 2x 160 GB Maxtor DiamondMax Plus9 in Raid 0, 480W Thermaltake Xaser Silent Purepower, Thermaltake Xaser V case.
Mods:
The CAPE watercooling installation includes a KC42-X2 Pro Copper block on the cpu, a NB 42-X2 on the chipset, and a GP 42-X2 Copper Radeon on the gpu. The X850XT has ZALMAN RAM aluminum heatsinks. A volt modded Swiftech MCP650 pumps approximately 600 LHP through a 8mm loop. The Evo 1800 (with only 2 volt modded fans) allows the cpu to idle @ 38°C and the gpu @ 35°C. An Alphacool AGB4 Plexi 200 serves as a reservoir. A silentmaxx HD-silencer keeps one of my HD's cool and quiet (haven't bought the second yet).
Need some Logisys 120mm UV Dual CCFL Ring Fans to effectively cool my system. I'll wait once I get an AMD 64bit system up and running. Could use a better case. Had to gut it. Way too many fans and way too much wiring before I went with watercooling. A quieter PSU is also on my Christmas wish list - an ElanVital Greenerger EVP-5007 maybe?
Specs:
ABIT NF7-S ver 2.0 nForce 2, AMD Athlon xp 2400+ 1.70v @ 2104.8 MHz, 2x 512 MB Kingston HyperX with FSB @ 200.4 MHz (400.9 MHz Dual-channel), ATI X850XT @ 520/540 MHz, 2x 160 GB Maxtor DiamondMax Plus9 in Raid 0, 480W Thermaltake Xaser Silent Purepower, Thermaltake Xaser V case.
Mods:
The CAPE watercooling installation includes a KC42-X2 Pro Copper block on the cpu, a NB 42-X2 on the chipset, and a GP 42-X2 Copper Radeon on the gpu. The X850XT has ZALMAN RAM aluminum heatsinks. A volt modded Swiftech MCP650 pumps approximately 600 LHP through a 8mm loop. The Evo 1800 (with only 2 volt modded fans) allows the cpu to idle @ 38°C and the gpu @ 35°C. An Alphacool AGB4 Plexi 200 serves as a reservoir. A silentmaxx HD-silencer keeps one of my HD's cool and quiet (haven't bought the second yet).
Need some Logisys 120mm UV Dual CCFL Ring Fans to effectively cool my system. I'll wait once I get an AMD 64bit system up and running. Could use a better case. Had to gut it. Way too many fans and way too much wiring before I went with watercooling. A quieter PSU is also on my Christmas wish list - an ElanVital Greenerger EVP-5007 maybe?
Last edited by a moderator:
The two small fans on it looks hilarious! Good job man! Nice system.
