Fan Problem

[AsrockPC]

Hello Everyone in this forum, im new btw and sry for my bad english i hope u guys understand me properly.Ok now i have This CPU http://www.cpu-world.com/CPUs/K8/AMD-Athlon 64 X2 6000+ - ADA6000IAA6CZ (ADA6000CZBOX).html

and This Fan http://imgur.com/AIotDoo with 4 pin connector

my motherboard is ASRock N68C-GS FX http://www.asrock.com/mb/NVIDIA/N68C-GS FX/

the big problem is my fan stick to 3668 RPM when i put for first time i see 6000+ rpm in Aida
but when i cllean the dust and install again to mobo the fan stick only to 3668 RPM and my pc shut down cuz is overheating i think. so guys please answear to this thread.

 

[st2000]

thermal paste: not properly installed

 

[P4-630]

reseat your CPU cooler

 

[AsrockPC]

thermal paste: not properly installed

damnn bro u very smart for last time when i remove the cooler i not put a thermal paste omgg rly its for this ?

 

[st2000]

its for this

absolutely: if your cooler is working and it goes to max speed very fast from turning on PC and after 1-15 mins it turns of - check TI
it's like cpu is working, cooler is working -> 95% TI issue(rest 5% are PSU or mobo failure, but it was ok before you cleaned up your cooler)
just dont turn on your pc before TI is placed properly - cpu may be harmed and even die
also just an advice: clean your cooler every 2-3 months and replace TI for about 15-20°C difference after full replacemnt tests(for example now you'll have 60°C under fulload -> replace TI if heatsink is clean and your cpu goes more than 75-80°C)

 

[AsrockPC]

absolutely: if your cooler is working and it goes to max speed very fast from turning on PC and after 1-15 mins it turns of - check TI
it's like cpu is working, cooler is working -> 95% TI issue(rest 5% are PSU or mobo failure, but it was ok before you cleaned up your cooler)
just dont turn on your pc before TI is placed properly - cpu may be harmed and even die
also just an advice: clean your cooler every 2-3 months and replace TI for about 15-20°C difference after full replacemnt tests(for example now you'll have 60°C under fulload -> replace TI if heatsink is clean and your cpu goes more than 75-80°C)

ok after when i put thermal paste still stick to 3668 idk what is TI?

 

[st2000]

TI = Thermal grease (also called thermal gel, thermal compound, thermal paste, heat paste, heat sink paste, thermal interface material, grey goo, or heat sink compound)© Wiki

for fan speed:
a)it's bug of sensor and fan is running normal speed and it's not loud
b)is your fan loud as hell? if so:
1)maybe fan speed in bios is set to 100%
2)you got 3pin connection cpu cooler(but you wrote it's 4pin so i suggest it may be set not to right slot or cable problem)

 

[AsrockPC]

TI = Thermal grease (also called thermal gel, thermal compound, thermal paste, heat paste, heat sink paste, thermal interface material, grey goo, or heat sink compound)© Wiki

for fan speed:
a)it's bug of sensor and fan is running normal speed and it's not loud
b)is your fan loud as hell? if so:
1)maybe fan speed in bios is set to 100%
2)you got 3pin connection cpu cooler(but you wrote it's 4pin so i suggest it may be set not to right slot or cable problem)

hello
1) a) im not sure this is bug maybe its it is, nvm in bios see only quiet fan disabled, this is not a problem when i install for first time and next when i clean dust working good when my cpu going up like in RPM of fan 4000 5000 6000 maxed of my fan i test this for first time in AIDA test stability
2) b) i put my fan on 4 pin connector in my mobo like a my fan cooler is 4 pin
i hope understand

 

[peche]

damnn bro u very smart for last time when i remove the cooler i not put a thermal paste omgg rly its for this ?

no thermal interface matherial, thermal paste compund or solution?
Damn...bro repaste it ...

 

[AsrockPC]

no thermal interface matherial, thermal paste compund or solution?
Damn...bro repaste it ...

already did but no effect on fan

 

[P4-630]

The fan may be overheating, thermal throttling

But serious, not sure what's going on, do you have another fan to try?

 

[AsrockPC]

The fan may be overheating, thermal throttling

But serious, not sure what's going on, do you have another fan to try?

hm im not have another fan but i can bought to try it

 

[peche]

hm im not have another fan but i can bought to try it

get a coolermaster hyper 212Evo instead stock fan....dont waste your time again on Stock coolers,

Regards,

 

[AsrockPC]

get a coolermaster hyper 212Evo instead stock fan....dont waste your time again on Stock coolers,

Regards,

gimme money

 

[peche]

 

[AsrockPC]

i think the problem is my FAN not my cooler so i think to bought just new same fan for the cooler and ill try it