EK Releases New Supremacy EVO X99 LGA2011v3 Water Block

[btarunr]

EK Water Blocks, Ljubljana based premium computer liquid cooling gear manufacturer, is proud to introduce EK-Supremacy EVO X99 water block, optimized for use on Intel socket LGA-2011-3 series processors. EK-Supremacy EVO X99 is the highest performance CPU water block for Intel X99 / LGA-2011-3 platform and comes with pre-assembled, error-preventing mounting mechanism. The result is a perfect installation which results in optimal performance every time.

EK Supremacy EVO X99 is truly the only product for performance seeking enthusiasts. It brings unmatched thermal performance with more than 2.2°C better performance on most popular LGA-2011-3 processors. Very high-flow design with low hydraulic restriction allows this product to be used in setups using weaker water pumps. Fine-tuned specifically for LGA-2011-3 it unleashes maximum performance by ensuring the optimal contact with the CPU integrated heat spreader (IHS).



The EK-Supremacy EVO uses the same cooling engine as it's predecessor. The cooling liquid accelerates through jet plate's nozzle and turbulently continues its path through numerous very thin channels, which provide extreme heat dissipating surface area. Specifically designed and carefully machined copper base (sometimes referred to as 'cold plate') is made from purest copper available on the market and is further polished to absolute mirror finish. This alone greatly improves the cooling performance of EK-Supremacy EVO.

This water block fits Intel LGA-2011-3 socket CPUs only and is readily available for purchase through EK Webshop and Partner Reseller Network. Less unnecassery parts also result in lower price.

MSRP

• EK-Supremacy EVO X99 - Nickel: 58.95€
• EK-Supremacy EVO X99 - Full Nickel: 76.95€

View at TechPowerUp Main Site

 

[buildzoid]

This will also fit on LGA 2011 right? Not just LGA 2011-3

 

[btarunr]

This will also fit on LGA 2011 right? Not just LGA 2011-3

Yes, ofc.

 

[VSG]

Yes it will, but the customized insert and jet plate is specific for LGA 2011-3 so you would be better off spending the extra $10-15 for the full Evo (or less if you go with copper cold plate versions) if you want that extra bit of performance.

 

[hero1]

I totally agree that buying the full EVO version is the best way to and change the jet plate. The CPU blocks always come with different jet plates for different platforms. The only plus to buying this would be the insert, like mentioned above but that would give you .2 C which is not that crucial.

 

[buildzoid]

See I would appreciate a 2.2C drop in temps on my 3960X after all 1.53V is really pushing the voltage and I want it to last. So far I've done that by having a cooler than keeps it at 72C full load but ideally I'd want 60C.