• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

EK Radeon R9 Fury X Water Blocks Now Available

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
46,390 (7.68/day)
Location
Hyderabad, India
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard ASUS ROG Strix B450-E Gaming
Cooling DeepCool Gammax L240 V2
Memory 2x 8GB G.Skill Sniper X
Video Card(s) Palit GeForce RTX 2080 SUPER GameRock
Storage Western Digital Black NVMe 512GB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
EK Water Blocks, Ljubljana based premium computer liquid cooling gear manufacturer, is excited to launch the true single-slot liquid cooling solution for AMD Radeon reference design R9 FURY X graphics card. EK-FC R9 Fury X directly cools the GPU, HBM as well as VRM (voltage regulation module) as water flows directly over these critical areas, thus allowing the graphics card and it's VRM to remain stable under high overclocks.

EK-FC R9 Fury X water block features EK unique central inlet split-flow cooling engine design for best possible cooling performance. Such system also works flawlessly with the reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic performance, allowing this product to be used in liquid cooling systems using weaker water pumps. Unlike the original AIO cooling solution that comes with AMD Radeon R9 FURY X and takes up two slots, EK-FC R9 Fury X water block will transform the FURY X into a single-slot graphics card.



The base is made of electrolytic copper (bare- or nickel-plated, depending on the variant) while the top is made of either acrylic- or POM Acetal material. Plexi variants also feature two pre-drilled slots for 3mm LED diodes. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure.

Additionally the EK-FC R9 Fury X has been engineered with FC Terminal connection ports for up to four FURY X on a single ATX form factor motherboard, thus allowing for trouble-free swap out and upgrade without any additional changes to the cooling loop.

These water blocks are made in Slovenia, Europe and are readily available for purchase through EK Webshop and Partner Reseller Network. An aesthetic retention backplate, which also cools the backside of the circuit board, is also available for separate purchase and comes in five different finish variants.

View at TechPowerUp Main Site
 
Joined
Apr 29, 2014
Messages
4,180 (1.15/day)
Location
Texas
System Name SnowFire / The Reinforcer
Processor i7 10700K 5.1ghz (24/7) / 2x Xeon E52650v2
Motherboard Asus Strix Z490 / Dell Dual Socket (R720)
Cooling RX 360mm + 140mm Custom Loop / Dell Stock
Memory Corsair RGB 16gb DDR4 3000 CL 16 / DDR3 128gb 16 x 8gb
Video Card(s) GTX Titan XP (2025mhz) / Asus GTX 950 (No Power Connector)
Storage Samsung 970 1tb NVME and 2tb HDD x4 RAID 5 / 300gb x8 RAID 5
Display(s) Acer XG270HU, Samsung G7 Odyssey (1440p 240hz)
Case Thermaltake Cube / Dell Poweredge R720 Rack Mount Case
Audio Device(s) Realtec ALC1150 (On board)
Power Supply Rosewill Lightning 1300Watt / Dell Stock 750 / Brick
Mouse Logitech G5
Keyboard Logitech G19S
Software Windows 11 Pro / Windows Server 2016
As usual, these are good looking water blocks!
 
Joined
Oct 27, 2009
Messages
1,133 (0.21/day)
Location
Republic of Texas
System Name [H]arbringer
Processor 4x 61XX ES @3.5Ghz (48cores)
Motherboard SM GL
Cooling 3x xspc rx360, rx240, 4x DT G34 snipers, D5 pump.
Memory 16x gskill DDR3 1600 cas6 2gb
Video Card(s) blah bigadv folder no gfx needed
Storage 32GB Sammy SSD
Display(s) headless
Case Xigmatek Elysium (whats left of it)
Audio Device(s) yawn
Power Supply Antec 1200w HCP
Software Ubuntu 10.10
Benchmark Scores http://valid.canardpc.com/show_oc.php?id=1780855 http://www.hwbot.org/submission/2158678 http://ww
As usual, these are good looking water blocks!

but the hbm are not flush with the gpu die... this will have the same problem cooling the memory that the stock block does.

I wonder if the hbm are just that fragile.
 

the54thvoid

Intoxicated Moderator
Staff member
Joined
Dec 14, 2009
Messages
12,461 (2.37/day)
Location
Glasgow - home of formal profanity
Processor Ryzen 7800X3D
Motherboard MSI MAG Mortar B650 (wifi)
Cooling be quiet! Dark Rock Pro 4
Memory 32GB Kingston Fury
Video Card(s) Gainward RTX4070ti
Storage Seagate FireCuda 530 M.2 1TB / Samsumg 960 Pro M.2 512Gb
Display(s) LG 32" 165Hz 1440p GSYNC
Case Asus Prime AP201
Audio Device(s) On Board
Power Supply be quiet! Pure POwer M12 850w Gold (ATX3.0)
Software W10
More importantly - can these be used on the no X Fury?
 
Joined
Apr 29, 2014
Messages
4,180 (1.15/day)
Location
Texas
System Name SnowFire / The Reinforcer
Processor i7 10700K 5.1ghz (24/7) / 2x Xeon E52650v2
Motherboard Asus Strix Z490 / Dell Dual Socket (R720)
Cooling RX 360mm + 140mm Custom Loop / Dell Stock
Memory Corsair RGB 16gb DDR4 3000 CL 16 / DDR3 128gb 16 x 8gb
Video Card(s) GTX Titan XP (2025mhz) / Asus GTX 950 (No Power Connector)
Storage Samsung 970 1tb NVME and 2tb HDD x4 RAID 5 / 300gb x8 RAID 5
Display(s) Acer XG270HU, Samsung G7 Odyssey (1440p 240hz)
Case Thermaltake Cube / Dell Poweredge R720 Rack Mount Case
Audio Device(s) Realtec ALC1150 (On board)
Power Supply Rosewill Lightning 1300Watt / Dell Stock 750 / Brick
Mouse Logitech G5
Keyboard Logitech G19S
Software Windows 11 Pro / Windows Server 2016
More importantly - can these be used on the no X Fury?
I don't see why not, its the same PCB design (As long as they use the reference design).

but the hbm are not flush with the gpu die... this will have the same problem cooling the memory that the stock block does.

I wonder if the hbm are just that fragile.
It cools it so I see no problem, plus its a less power than previous so I doubt it will have any trouble.
 
Joined
Jun 19, 2015
Messages
6 (0.00/day)
Processor Intel Core i7 2600K (Sandy Bridge)
Motherboard Asus P8P67 Pro
Cooling Noctua NH-D15
Memory Corsair Vengeance DDRS 4GB x 2
Video Card(s) Galax GTX 980 Ti (reference)
Storage 1 x Samsung 840 Pro, 1 x 2TB Hitachi 7200 RPM HDD
Audio Device(s) Creative X-Fi
Power Supply Corsair AX850
Mouse Razer Deathadder Chroma
Keyboard Razer Black Widow Ultimate (2013)
Really don't see the point of custom watercooling the Fury X unless you want to go crossfire. There's really no head room for overclocking anyway.
 
Joined
Mar 23, 2012
Messages
777 (0.18/day)
Location
Norway
System Name Games/internet/usage
Processor I7 5820k 4.2 Ghz
Motherboard ASUS X99-A2
Cooling custom water loop for cpu and gpu
Memory 16GiB Crucial Ballistix Sport 2666 MHz
Video Card(s) Radeon Rx 6800 XT
Storage Samsung XP941 500 GB + 1 TB SSD
Display(s) Dell 3008WFP
Case Caselabs Magnum M8
Audio Device(s) Shiit Modi 2 Uber -> Matrix m-stage -> HD650
Power Supply beQuiet dark power pro 1200W
Mouse Logitech MX518
Keyboard Corsair K95 RGB
Software Win 10 Pro
Really don't see the point of custom watercooling the Fury X unless you want to go crossfire. There's really no head room for overclocking anyway.

a Fury x, a Z97 ITX board with a i7 k cpu and one 200 mm radiator is one hell of a powerful combination.
 
Joined
Nov 9, 2011
Messages
182 (0.04/day)
Location
Indonesia
a Fury x, a Z97 ITX board with a i7 k cpu and one 200 mm radiator is one hell of a powerful combination.
Change that fury x with a 980ti and you'll get a much much more powerfull combination with similiar prices.
 
Joined
May 2, 2015
Messages
144 (0.04/day)
Location
Finland
Processor AMD Ryzen 7 5700X
Motherboard MSI B350 Tomahawk
Cooling Noctua NH-U12S SE-AM4
Memory 32GB (2 x 16GB) Kingston FURY Beast, DDR4 3200MHz, CL16
Video Card(s) ASUS Cerberus GeForce GTX 1070 Ti Advanced Edition
Storage Samsung 960 EVO 512 GB (M.2), Samsung 860 EVO 1 TB (SATA)
Display(s) 27" Ozone DSP27 Pro
Case Fractal Design Define S2
Audio Device(s) Onkyo TX-SR444
Power Supply Seasonic 620W M12II-620 Evolution
Mouse Logitech G502 HERO SE
Keyboard Razer Ornata Chroma
Software Windows 10 Home x64
Change that fury x with a 980ti and you'll get a much much more powerfull combination with similiar prices.
More powerful? Yes. "Much much more" powerful? No.
 
Joined
Mar 23, 2012
Messages
777 (0.18/day)
Location
Norway
System Name Games/internet/usage
Processor I7 5820k 4.2 Ghz
Motherboard ASUS X99-A2
Cooling custom water loop for cpu and gpu
Memory 16GiB Crucial Ballistix Sport 2666 MHz
Video Card(s) Radeon Rx 6800 XT
Storage Samsung XP941 500 GB + 1 TB SSD
Display(s) Dell 3008WFP
Case Caselabs Magnum M8
Audio Device(s) Shiit Modi 2 Uber -> Matrix m-stage -> HD650
Power Supply beQuiet dark power pro 1200W
Mouse Logitech MX518
Keyboard Corsair K95 RGB
Software Win 10 Pro
Change that fury x with a 980ti and you'll get a much much more powerfull combination with similiar prices.

But the 980ti is longer than the motherboard, making that the limiting factro for the case, and depending on the resolution it is from equal to sligthly below the performance of a 980ti, so no, you do not get a much more powerfull combination.
 
Joined
Apr 30, 2008
Messages
4,875 (0.83/day)
Location
Multidimensional
System Name Boomer Master Race
Processor AMD Ryzen 7 7735HS APU
Motherboard BareBones Mini PC MB
Cooling Mini PC Cooling
Memory Crucial 32GB 4800MHz
Video Card(s) AMD Radeon 680M 8GB IGPU
Storage Crucial 500GB M.2 SSD + 2TB Ext HDD
Display(s) Sony 4K Bravia X85J 43Inch TV 120Hz
Case Beelink Mini PC Chassis
Audio Device(s) Built In Realtek Digital Audio HD
Power Supply 120w Power Brick
Mouse Logitech G203 Lightsync
Keyboard Atrix RGB Slim Keyboard
VR HMD ( ◔ ʖ̯ ◔ )
Software Windows 10 Home 64bit
Benchmark Scores Don't do them anymore.
Change that fury x with a 980ti and you'll get a much much more powerfull combination with similiar prices.

Much Much more? What? o_O
 
Joined
Jun 19, 2015
Messages
6 (0.00/day)
Processor Intel Core i7 2600K (Sandy Bridge)
Motherboard Asus P8P67 Pro
Cooling Noctua NH-D15
Memory Corsair Vengeance DDRS 4GB x 2
Video Card(s) Galax GTX 980 Ti (reference)
Storage 1 x Samsung 840 Pro, 1 x 2TB Hitachi 7200 RPM HDD
Audio Device(s) Creative X-Fi
Power Supply Corsair AX850
Mouse Razer Deathadder Chroma
Keyboard Razer Black Widow Ultimate (2013)
The whole point of the Fury X is for ITX cases as a HTPC. But since it doesn't support HDMI 2.0, I don't really see the point of building a small form factor PC unless you plan to brind it for LAN parties. Otherwise, 980Ti would make much more sense. A single 980Ti with custom cooler is at least 20% above a Fury X at around the same price.
 
Joined
Feb 11, 2009
Messages
5,403 (0.97/day)
System Name Cyberline
Processor Intel Core i7 2600k -> 12600k
Motherboard Asus P8P67 LE Rev 3.0 -> Gigabyte Z690 Auros Elite DDR4
Cooling Tuniq Tower 120 -> Custom Watercoolingloop
Memory Corsair (4x2) 8gb 1600mhz -> Crucial (8x2) 16gb 3600mhz
Video Card(s) AMD RX480 -> RX7800XT
Storage Samsung 750 Evo 250gb SSD + WD 1tb x 2 + WD 2tb -> 2tb MVMe SSD
Display(s) Philips 32inch LPF5605H (television) -> Dell S3220DGF
Case antec 600 -> Thermaltake Tenor HTCP case
Audio Device(s) Focusrite 2i4 (USB)
Power Supply Seasonic 620watt 80+ Platinum
Mouse Elecom EX-G
Keyboard Rapoo V700
Software Windows 10 Pro 64bit
Change that fury x with a 980ti and you'll get a much much more powerfull combination with similiar prices.

You might want to check your benchmarks again....
 
Joined
Jan 6, 2014
Messages
597 (0.16/day)
Location
Germany
System Name Main Machine
Processor Intel i9-13900KS
Motherboard ASUS ROG Maximus Z790 Apex
Cooling Water cooling, 2x EK-DDC 3.2 PWM, 1x360mm+1x240mm+1x120mm EK, Mora 360 Pro, EK-Quantum Velocity 2
Memory G.SKILL 32GB DDR5-7200, 7200J3445G16GX2-TZ5RS
Video Card(s) ASRock RX 7900 XTX Aqua
Storage 2x WD_BLACK SN850X 1TB und 2TB, 2x8TB Seagate Ironwolf
Display(s) ASUS ROG Strix XG27WQ 27inch 165Hz FreeSync Premium Pro
Case Cooler Master COSMOS C700P
Audio Device(s) Turtle Beach Elite Pro Tournament + Elite Pro TAC
Power Supply Corsair AX1600i 1600W Titanium
Mouse Logitech G903 LIGHTSPEED Wireless
Keyboard ROCCAT Ryos MK Pro
Software Win 11
Considering to buy the EK-FC R9 Fury X - Nickel for my Fury X card to integrate it into my existing water loop.
EK makes nice looking blocks. I had the same one on my Radeon 290X (EK-FC R9-290X - Nickel).

I have a water cooling loop existing of 2x240mm radiators and 1x120mm radiator, which kept my Radeon 290X and i7-4770K running under 50°C under full load. I replaced 290x with Fury X and the loop is just running the CPU alone and waiting for single slotted Fury X. :)

Note: My Fury X doesn't suffer from pump whine noise, it has the new pump with Chrome Cooler Master Badge. Though I find the fan that is used on the radiator to be loader than the Noctua NF-F12 PWM fans that I am using on my custom water loop.
 
Last edited:
Joined
Jun 11, 2013
Messages
353 (0.09/day)
Processor Core i5-3350P @3.5GHz
Motherboard MSI Z77MA-G45 (uATX)
Cooling Stock Intel
Memory 2x4GB Crucial Ballistix Tactical DDR3 1600
Video Card(s) |Ξ \/ G /\ GeForce GTX 670 FTW+ 4GB w/Backplate, Part Number: 04G-P4-3673-KR, ASIC 68.5%
Storage some cheap seagates and one wd green
Display(s) Dell UltraSharp U2412M
Case some cheap old eurocase, black, with integrated cheap lit lcd for basic monitoring
Audio Device(s) Realtek ALC892
Power Supply Enermax Triathlor 550W ETA550AWT bronze, non-modular, airflow audible over 300W power draw
Mouse PMSG1G
Keyboard oldschool membrane Keytronic 104 Key PS/2 (big enter, right part of right shift broken into "\" key)
Considering to buy the EK-FC R9 Fury X - Nickel for my Fury X card to integrate it into my existing water loop.
EK makes nice looking blocks. I had the same one on my Radeon 290X (EK-FC R9-290X - Nickel).

I have a water cooling loop existing of 2x240mm radiators and 1x120mm radiator, which kept my Radeon 290X and i7-4770K running under 50°C under full load. I replaced 290x with Fury X and the loop is just running the CPU alone and waiting for single slotted Fury X. :)

Note: My Fury X doesn't suffer from pump whine noise, it has the new pump with Chrome Cooler Master Badge. Though I find the fan that is used on the radiator to be loader than the Noctua NF-F12 PWM fans that I am using on my custom water loop.
thanx for feedback. how about coil whine or other cicada-like coil sounds during operation..<
 
Top