ECS Unveils the Z170-Lightsaber

[btarunr]

ECS Elitegroup showed off its latest flagship socket LGA1151 board, the Z170-Lightsaber, likely designed for its RGB LED product styling. The board features a 14-phase VRM powering the CPU, and expansion slots that include two PCI-Express 3.0 x16 (x8/x8 when both are populated), a third x16 (electrical x4) slot wired to the PCH, and four other x1 slots. Storage connectivity includes a 32 Gb/s M.2 with NVMe boot support, 16 Gb/s SATA-Express, and six SATA 6 Gb/s ports.

The modern connectivity on offer include two USB 3.1 ports (apparently both of them are type-A), six other USB 3.0 ports, DisplayPort 1.2 and HDMI 1.4, a gigabit Ethernet interface driven by Killer E2400 controller, and an audio solution with a 115 dBA SNR CODEC, ground-layer isolation, electrolytic capacitors, and a user-replaceable OPAMP. Overclocker friendly features include dual-BIOS with an on-demand BIOS backup/restore button, three performance preset buttons, power/reboot buttons, and a 3-digit POST error readout.



View at TechPowerUp Main Site

 

[natr0n]

The ECS name always triggers purple motherboard memories.

 

[RejZoR]

For me it's the copper colored chipset heatsink with ECS Elitegroup written on it And it had a black PCB! I'm talking about the K7S5A. Damn, I still remember the model name after all this years

 

[Ruru]

This needs to have Star Wars Battlefront bundled with it.

 

[Octavean]

Can they just use the word "Lightsaber" like that,....?