- Joined
- Oct 21, 2005
- Messages
- 6,880 (1.02/day)
- Location
- USA
System Name | Computer of Theseus |
---|---|
Processor | Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset) |
Motherboard | EVGA Z690 Classified |
Cooling | Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active |
Memory | G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK |
Video Card(s) | EVGA Geforce 3060 XC Black Gaming 12GB |
Storage | 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT |
Display(s) | Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms. |
Case | Lian Li O11 Air Mini |
Audio Device(s) | Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer |
Power Supply | Super Flower Leadex Platinum SE 1000W 80+ Platinum White |
Mouse | Zowie EC3-C |
Keyboard | Vortex Multix 87 Winter TKL (Gateron G Pro Yellow) |
Software | Win 10 LTSC 21H2 |
Looking for a good fan that is 140mm, has 140mm hole spacing, can tolerate being mounted with the impeller facing upwards. My case has a top intake. Does anyone have any recommendations?
I have tried:
Antec 140mm: started developing a loud whir after a few weeks. I believe it is sleeve bearing.
Masscool SL-FD14025: rattles bad after just one day despite claim of dual ball bearing.
Yate Loon D14BH-12: bad ass ball bearing 140 cfm fan that is overkill for my needs, cant find slower speed versions, undervolting is hard on my wimpy scythe 3.5 fan controller. Can't find the low speed version of this fan anywhere except in sleeve version.
Is this fan position the most stressful on the motor's lubrication?
I have tried:
Antec 140mm: started developing a loud whir after a few weeks. I believe it is sleeve bearing.
Masscool SL-FD14025: rattles bad after just one day despite claim of dual ball bearing.
Yate Loon D14BH-12: bad ass ball bearing 140 cfm fan that is overkill for my needs, cant find slower speed versions, undervolting is hard on my wimpy scythe 3.5 fan controller. Can't find the low speed version of this fan anywhere except in sleeve version.
Is this fan position the most stressful on the motor's lubrication?