• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

[Case Gallery] SWEET GREEN CASE WITH BLUE LEDS

binsky3333

binsky3333

New Member
Joined
Jul 5, 2007
Messages
643 (0.10/day)
System Specs
System Name Green Machine
Processor Intel e6420@ 2.13GHz
Motherboard ASUS p5n32-e -sli
Cooling 4x80mm fans
Memory 4gb G skill ddr2-800
Video Card(s) 2 EVGA Geforce 8800GTS 320MB
Storage 1 Western digital 500gb sata
Display(s) Dell e207wfp
Case Apevia x-cruiser green
Audio Device(s) X-fi Xtreme gamer
Power Supply BFG 800watt
Software Windows vista ultimate 64bit
To view this case mod, go here.



Specs:
Asus p5n32-e-SLI
Dual Geforce 8800GTS 320mb
Intel Dual core e6420 (2.13GHz)
7 case fans
Cool green case with temp and etc gauges
Western digital 500gb SATA HD
Sound blaster Live Extreme gamer
Apevia 680watt PS with changing LED
4GB of PC6400 G skill ram

Mods:
added extra Apevia fans

This is my first computer build!!!!
 
Last edited by a moderator:
Nice one: The rig (the cable's could be sorted to look much better) the hardware is quite respectable and change the stock cooler and you have some good overclocking on your hands my brother c2d is @ 3.7 with an arctic freezer 7
i will vote soon
 
I have that same case but a dark red, with similar blue lighting. I cut the rear hole for the 120mm to have better exhaust airflow, put in a blue light bar up top. Good case for sure. Just wish they had a pre set 120mm front intake...I may modify later, but I have 2x80mm that do fine. You should put a 120mm for that reat exhuast. Do you have a fan at the top 80mm spot? What about for front intakes? Also if you're sticking with that OE Cpu Cooler a fan in that side vent could help get cool air to that cpu for more effective cooling. :toast:

Nice setup Binsky!
 
Hey Kursah
I was just thinking about doing that.
Can you recommend a good cpu cooler. (Besides thermaltake V1) I put it in and it actually raised my cpu temp!

Thx for your comment, Binksy!
 
Last edited:
It always amazes me why someone would vote 1. Gave you a 10 to counteract that bloody dickhead! :)
 
Binksy, I personally use the AC Freezer Pro 7, it's cheap and does a great job. It comes with MX-1 applied, and that is pretty much considered the #1 competitor against AS 5, plus it doesn't take 200 hours to set to get best cooling results. I got mine for like $25. It's pretty quiet, pretty efficient, and very cheap. It's easily the best price/performance cooler ATM in my mind. Sure there are better, but you WILL pay for it. It lines up perfect with my 120mm exhuast and it has it's lower 3 fins blowing air on the rear CPU power capacitors. I highly recommend it! Hope that helps! :toast:

Also, cutting that hole for my 120mm in the rear helped exuast airflow quite well. The only thing the case could use is a fan where the VGA vent is for better video card cooling. But aside from that, it's a good case and tough to beat for the price!
 
Also another tip, you have plenty of room on the other side of the 3.5" HDD cage for hiding those cables! That's what I did and it cleaned it up a lot! Takes a little more work, just don't stretch the door wires too tight or it will cause binding in the door, run them under your HDD (I mount my HDD at the lowest spot so the intake fans blow cool air over it and keep it cooler, plus it helps to hide those wires!).
 
Kursah said:
Also another tip, you have plenty of room on the other side of the 3.5" HDD cage for hiding those cables! That's what I did and it cleaned it up a lot! Takes a little more work, just don't stretch the door wires too tight or it will cause binding in the door, run them under your HDD (I mount my HDD at the lowest spot so the intake fans blow cool air over it and keep it cooler, plus it helps to hide those wires!).
Click to expand...



Ok thx for the tip!
 
The cabling leaves a lot to be desired, in a practical sense however its fine. Remove the slot covers because the 8800's direct heat outlet system leaks (why cant they seal it :wtf:). The supplied 80mm fan isnt enough in my opinion; upgrade it to the 120mm fans, do the same for the intake.
 
As tk said the wiring is frankly horrible. Look at either my case or tk's for some ideas on hiding those wires. I vote a 3
 
terrible. absolutely terrible.
 
not bad for a first time build, but a lot to be learned and accomplished.. I'll vote when there's more to work with..
 
tkpenalty said:
The cabling leaves a lot to be desired, in a practical sense however its fine. Remove the slot covers because the 8800's direct heat outlet system leaks (why cant they seal it :wtf:). The supplied 80mm fan isnt enough in my opinion; upgrade it to the 120mm fans, do the same for the intake.
Click to expand...


Thanks for your tips and also i was thinking about upgrading to a 120mm fan!
 
Something I just noticed is the blue led fan in the back needs to be switched around to where its blowing air out the back, not sucking it in.
 
You must log in or register to reply here.
Back
Top