• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Qimonda Develops Low-voltage 800MHz FB-DIMMs

M

malware

New Member
Joined
Nov 7, 2004
Messages
5,422 (0.76/day)
Location
Bulgaria
System Specs
Processor Intel Core 2 Quad Q6600 G0 VID: 1.2125
Motherboard GIGABYTE GA-P35-DS3P rev.2.0
Cooling Thermalright Ultra-120 eXtreme + Noctua NF-S12 Fan
Memory 4x1 GB PQI DDR2 PC2-6400
Video Card(s) Colorful iGame Radeon HD 4890 1 GB GDDR5
Storage 2x 500 GB Seagate Barracuda 7200.11 32 MB RAID0
Display(s) BenQ G2400W 24-inch WideScreen LCD
Case Cooler Master COSMOS RC-1000 (sold), Cooler Master HAF-932 (delivered)
Audio Device(s) Creative X-Fi XtremeMusic + Logitech Z-5500 Digital THX
Power Supply Chieftec CFT-1000G-DF 1kW
Software Laptop: Lenovo 3000 N200 C2DT2310/3GB/120GB/GF7300/15.4"/Razer
Qimonda said it is developing with Supermicro FB-DIMM memory modules with decreased supply voltage to address one of the key concerns of this memory technology - power consumption. The new 800MHz FB DIMMs operate with a supply voltage of 1.5V, instead of the regular 1.8V. According to Qimonda the 16.6% reduction in voltage results in up to 20% reduction in direct system-level power consumption in a fully loaded system. Additional power and cost savings can be achieved as the memory modules show lower heat dissipation. Qimonda claims that the power savings do not cause performance loss. The company said that it has supplied the low-voltage FB-DIMMs to Supermicro in a 2GB configuration for a demonstration at the ongoing supercomputing conference SC07. The companies did not say when these devices will be available for purchase.

View at TechPowerUp Main Site
 
hat

hat

Enthusiast
Joined
Nov 20, 2006
Messages
21,731 (3.42/day)
Location
Ohio
System Specs
System Name Starlifter :: Dragonfly
Processor i7 2600k 4.4GHz :: i5 10400
Motherboard ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling Cryorig M9 :: Stock
Memory 4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s) PNY GTX1070 :: Integrated UHD 630
Storage Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s) Onn 165hz 1080p :: Acer 1080p
Case Antec SOHO 1030B :: Old White Full Tower
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply FSP Hydro GE 550w :: EVGA Supernova 550
Software Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores >9000
Up to a 20% reduction? What were they using? Onboard graphics, one HDD, no other perhipials, and a low-wattqge CPU? All passive... no fans? :roll:
 
WarEagleAU

WarEagleAU

Bird of Prey
Joined
Jul 9, 2006
Messages
10,812 (1.67/day)
Location
Gurley, AL
System Specs
System Name Pandemic 2020
Processor AMD Ryzen 5 "Gen 2" 2600X
Motherboard AsRock X470 Killer Promontory
Cooling CoolerMaster 240 RGB Master Cooler (Newegg Eggxpert)
Memory 32 GB Geil EVO Portenza DDR4 3200 MHz
Video Card(s) ASUS Radeon RX 580 DirectX 12 DUAL-RX580-O8G 8GB 256-Bit GDDR5 HDCP Ready CrossFireX Support Video C
Storage WD 250 M.2, Corsair P500 M.2, OCZ Trion 500, WD Black 1TB, Assorted others.
Display(s) ASUS MG24UQ Gaming Monitor - 23.6" 4K UHD (3840x2160) , IPS, Adaptive Sync, DisplayWidget
Case Fractal Define R6 C
Audio Device(s) Realtek 5.1 Onboard
Power Supply Corsair RMX 850 Platinum PSU (Newegg Eggxpert)
Mouse Razer Death Adder
Keyboard Corsair K95 Mechanical & Corsair K65 Wired, Wireless, Bluetooth)
Software Windows 10 Pro x64
More improved memory circuits and ic pathways. Thats just a guess though.
 
D

Deleted member 3

Joined
May 20, 2004
Messages
10,487 (1.44/day)
hat said:
Up to a 20% reduction? What were they using? Onboard graphics, one HDD, no other perhipials, and a low-wattqge CPU? All passive... no fans? :roll:
Click to expand...

Perhaps you should stop the :roll: and start :banghead:.

FB-DIMMs are used on the Intel 5000/5400 platforms. Those are high end workstations and servers. Since they're speaking of such a huge improvement in power usage it's about servers with 16-24 DIMM's that use around 10W each. So since it's a server platform I would say yes they did use on board graphics.

Perhaps you should know what the news is about before you start :roll:.
 
Wile E

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Specs
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
How long before you pick yours up Dan? lol

I bet these would clock better.
 
D

Deleted member 3

Joined
May 20, 2004
Messages
10,487 (1.44/day)
Wile E said:
How long before you pick yours up Dan? lol

I bet these would clock better.
Click to expand...

Pointless currently, but since you asked.

I'm waiting for confirmation that Clovers can run at 1600MHz FSB on Seaburg, if that works I'm planning on replacing my motherboard and have my Current CPU's run at 1600+ MHz FSB, at that time new memory could be nice to run 1:1.

Also, these modules won't work on my current board anyway, i5000 only supports 1.8V
 
Wile E

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Specs
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
DanTheBanjoman said:
Pointless currently, but since you asked.

I'm waiting for confirmation that Clovers can run at 1600MHz FSB on Seaburg, if that works I'm planning on replacing my motherboard and have my Current CPU's run at 1600+ MHz FSB, at that time new memory could be nice to run 1:1.

Also, these modules won't work on my current board anyway, i5000 only supports 1.8V
Click to expand...
That's why my overclock statement. 1.5 modules running at 1.8 should yield better OCs. Well, at least that's what I would expect, anyway.
 
You must log in or register to reply here.
Top