- Joined
- Oct 9, 2007
- Messages
- 47,880 (7.38/day)
- Location
- Dublin, Ireland
System Name | RBMK-1000 |
---|---|
Processor | AMD Ryzen 7 5700G |
Motherboard | Gigabyte B550 AORUS Elite V2 |
Cooling | DeepCool Gammax L240 V2 |
Memory | 2x 16GB DDR4-3200 |
Video Card(s) | Galax RTX 4070 Ti EX |
Storage | Samsung 990 1TB |
Display(s) | BenQ 1440p 60 Hz 27-inch |
Case | Corsair Carbide 100R |
Audio Device(s) | ASUS SupremeFX S1220A |
Power Supply | Cooler Master MWE Gold 650W |
Mouse | ASUS ROG Strix Impact |
Keyboard | Gamdias Hermes E2 |
Software | Windows 11 Pro |
Chinese website Hardspell conducted a comprehensive pre-release evaluation of the upcoming Deneb 45nm Quad-core processor by AMD. The Deneb core incorporates thrice the amount of L3 Cache (that's 6 MB), and uses the same SIMD sets as its 65nm counterparts.
Here's a shocker: While the Phenom X4 9650 (65nm, 2.30 GHz, B3) consumes 104.1 W at load (peak), the 45nm Deneb (45nm, 2.30 GHz) peaks at an astonishing 57.3 W according to Hardspell's findings, go to see, the Deneb has an added load of transistors due to a 300% increase in the L3 Cache size. Let's bring in some numbers and figures.
CPU-Z Identification
Version 1.46.2 and above of CPU-Z detects the processor except the CPUID string which the engineering samples don't usually bring along. The 2.30 GHz Deneb Part comes with a 1.80 GHz HT link with 3600 MT/s of system bandwidth over the HyperTransport 3.0 bus. The L3 Cache uses 48-way set-associative paths.

Power Consumption
Specifications of the test-bed are provided. The 65nm Agena part was compared to the 45nm Deneb at the same clock-speed, idle and load consumptions were measured (first chart: idle, second: load):

Benchmark Scores
Fritz Chess (higher is better):

W-Prime Multithreaded Benchmark (time, lower is better):

POV-Ray 3.7 beta23 SSE2 (higher is better):

H.264 Encoding (time, lower is better):

3DMark Vantage (CPU score, higher is better):

The test bed was configured as follows:

View at TechPowerUp Main Site
Here's a shocker: While the Phenom X4 9650 (65nm, 2.30 GHz, B3) consumes 104.1 W at load (peak), the 45nm Deneb (45nm, 2.30 GHz) peaks at an astonishing 57.3 W according to Hardspell's findings, go to see, the Deneb has an added load of transistors due to a 300% increase in the L3 Cache size. Let's bring in some numbers and figures.
CPU-Z Identification
Version 1.46.2 and above of CPU-Z detects the processor except the CPUID string which the engineering samples don't usually bring along. The 2.30 GHz Deneb Part comes with a 1.80 GHz HT link with 3600 MT/s of system bandwidth over the HyperTransport 3.0 bus. The L3 Cache uses 48-way set-associative paths.


Power Consumption
Specifications of the test-bed are provided. The 65nm Agena part was compared to the 45nm Deneb at the same clock-speed, idle and load consumptions were measured (first chart: idle, second: load):


Benchmark Scores
Fritz Chess (higher is better):

W-Prime Multithreaded Benchmark (time, lower is better):

POV-Ray 3.7 beta23 SSE2 (higher is better):

H.264 Encoding (time, lower is better):

3DMark Vantage (CPU score, higher is better):

The test bed was configured as follows:

View at TechPowerUp Main Site
Last edited: