• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Gigabyte Shows New RTX 4070 Ti WindForce Series Graphics Card

GFreeman

News Editor
Staff member
Joined
Mar 6, 2023
Messages
2,079 (2.37/day)
Gigabyte has introduced its new NVIDIA GeForce RTX 4070 Ti WindForce series, that will actually be a sixth SKU in the RTX 4070 Ti lineup, alongside two AORUS models, Eagle, Gaming, and AERO models. Surprisingly, this is a completely new design that has not been used on any previous Gigabyte cards, featuring a 2.5-slot, triple-fan cooler design.

Gigabyte did not give out a lot of information, so we do not know when the new Gigabyte GeForce RTX 4070 Ti WindForce series will actually be available or at what price, but it is safe to assume it could end up to be the least expensive in the lineup. The new RTX 4070 Ti WindForce is also an OC edition card, which means it comes with a slight factory overclock, pushing the GPU up to 2625 MHz, which is a rather minor 15 MHz overclock.



According to the details provided by Gigabyte, the new WindForce cooling system features three 80 mm alternate spinning graphene nano lubricant sleeve bearing fans, eight copper heatpipes, and a direct touch copper plate. It also comes with a metal backplate as well. Of course, it still needs a single 16-pin power connector, which is located at the top.



The Gigabyte RTX 4070 Ti WindForce OC (GV-N407TWF3OC-12GD) is not yet available in retail/e-tail but we will certainly keep an eye out for it.

View at TechPowerUp Main Site | Source
 
L=261 W=126 H=50 mm. (Not a comment on previous comment, just grabbed the info off the spec page for this card, for anyone interested),

Might actually be an interesting card to review. 261mm is pretty short for a triple fan cooler, even the reference 7900XT is 275mm and a simple vapor chamber. Overall depth of the card is similar to Eagle.

The provided images look like the VRAM cooling was simplified and there's a general loss of finstack area around the GPU compared to Eagle? Also smaller flow-through cutout on the back.

4070 ti installed top_1_1.jpg
 
three 80 mm alternate spinning graphene nano lubricant sleeve bearing fans

Gosh that's a lot of bs in one sentence to say, 80mm fans. The fans look exactly like the fans I had on my RTX 2070 before I buy an artic GPU cooler. Those Gigabyte "80 mm fans" are loud as fck.
 
Might actually be an interesting card to review. 261mm is pretty short for a triple fan cooler, even the reference 7900XT is 275mm and a simple vapor chamber. Overall depth of the card is similar to Eagle.

The provided images look like the VRAM cooling was simplified and there's a general loss of finstack area around the GPU compared to Eagle? Also smaller flow-through cutout on the back.

this is REV1.0

if you put Rev2.0 eagle and WF3 side by side, they are exactly the same, apart from the shroud. so either one should do the job.
 

Attachments

  • 1000w1.png
    1000w1.png
    170.6 KB · Views: 129
  • 1000e1.png
    1000e1.png
    205.7 KB · Views: 126
Last edited:
this is REV1.0

if you put Rev2.0 eagle and WF3 side by side, they are exactly the same, apart from the shroud. so either one should do the job.

View attachment 288245

So Gigabyte shrunk the cooler in every dimension and replaced the 90mm spinners with 80mm, and called it Rev. 2.0? lol

They kept the heatpipe count the same but the VRAM (and GPU?) baseplate is now bare copper without that extra plate on top.

Gigabyte cards do pretty well with VRAM temps this gen, I guess there's no reason to expect any different from 2.0.

Screenshot_20230317-131346_Chrome_1.pngScreenshot_20230317-131537_Chrome_1.png
4070 ti eagle pcb.jpg
 
  • Like
Reactions: N/A
Rev20 doesn't always mean worse, like the M27Q rev2 monitor is RGB subpixel layout and rev1 is BGR but it's nowhere to be found. neither is 1080P 24", completely gone.
 
Last edited:
Nice clean design, I approve.
 
Back
Top