- Joined
- Jun 4, 2011
- Messages
- 431 (0.08/day)
| System Name | All the Cores ... (VMs) |
|---|---|
| Processor | Ryzen9 5900x |
| Motherboard | Gigabyte X570 Aorus Master (Bios F36c) |
| Cooling | Noctua NH-D15S |
| Memory | TridentZ neo 4x 16gb 3600Mhz C16 (F4-3600C16D-32GTZNC) |
| Video Card(s) | RTX 3070 Ti |
| Storage | 2x Sn750 2TB |
| Display(s) | OPTIX MPG341CQR & LG 32UD60-B |
| Case | CASELABS M8 |
| Power Supply | EVGA SuperNOVA g5 750w |
| Mouse | Corsair m65 Pro |
| Keyboard | Corsair K70 |
| Software | Windows 10pro/64 |
| Benchmark Scores | N/A .. yet updating soon |
So, I have been using VeraCrypt for a few years now. Have done A few 2 -3tb containers in the past. I have A case use where, I want to use Windows Storage spaces with Parity... that gives me 1 drive = 7.8 TB with one disk fail over that I can rebuild in any windows machine. In that 7.8 tb storage pool , I have started to make A 4tb container ... it has been going on for more then 48 hours now .. I can hear the drives, also their temps were hitting 50c to I added another fan on them.
I did start this with A non- quick fromat .. however after 5 hours it was still less then 1 % ... waited another hour it was still just 1% assumed the GUI was bugged or something and left it to be .. I think the next time i checked it .. it was maybe 9 hours in and still 1% ... and about 2 hours after that it had changed to 2%.
At this point I did not think it was bugged, but was going to take 11 hours per 1% = 1100 / 24 = 45 days ... so .. i canceled and restarted with A Quick format.
It has been at it for about 60 hours now ... however with Quick format .. thier is no % .. or anything .. the Done says 100% , speed 2.TiB/s , Left is blank.
So I have no clue what is going on .... is it just doing nothing you think .. is it just A bugged GUI.
I have done 3 -4 tb on single drives before and it never takes this long ...
What do yall think ?
I did start this with A non- quick fromat .. however after 5 hours it was still less then 1 % ... waited another hour it was still just 1% assumed the GUI was bugged or something and left it to be .. I think the next time i checked it .. it was maybe 9 hours in and still 1% ... and about 2 hours after that it had changed to 2%.
At this point I did not think it was bugged, but was going to take 11 hours per 1% = 1100 / 24 = 45 days ... so .. i canceled and restarted with A Quick format.
It has been at it for about 60 hours now ... however with Quick format .. thier is no % .. or anything .. the Done says 100% , speed 2.TiB/s , Left is blank.
So I have no clue what is going on .... is it just doing nothing you think .. is it just A bugged GUI.
I have done 3 -4 tb on single drives before and it never takes this long ...
What do yall think ?
