• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

AIO Pump noise?

Joined
Jan 25, 2006
Messages
1,470 (0.21/day)
Processor Ryzen 1600AF @4.2Ghz 1.35v
Motherboard MSI B450M PRO-A-MAX
Cooling Deepcool Gammaxx L120t
Memory 16GB Team Group Dark Pro Sammy-B-die 3400mhz 14.15.14.30-1.4v
Video Card(s) XFX RX 5600 XT THICC II PRO
Storage 240GB Brave eagle SSD/ 2TB Seagate Barracuda
Display(s) Dell SE2719HR
Case MSI Mag Vampiric 011C AMD Ryzen Edition
Power Supply EVGA 600W 80+
Software Windows 10 Pro
So I transferred my PC into a new case yesterday (thread here) and in the process I mounted my AIO rad to the top of my case, now I seem to have what I can only describe as a sort of pulsating hum sound, it sounds like a fan but I'm sure it's not any of my case fans, questions is, is this likely to go away after the rad settles after being moved around or would it be better to mount the rad vertically? (how I had it previously) I tried to record it on my phone but you can't make it out, its barely noticeable but impossible to ignore now that I can hear it, so it's a rather annoying issue.
 
Joined
Jul 25, 2020
Messages
30 (0.02/day)
Location
Germany
Processor i7-4790K 4.6GHz all core
Motherboard MSI Z97 Gaming 7
Cooling Arctic Liquid Freezer II 280
Memory 32GB DDR3 2400MHz 11-13-13-31
Video Card(s) 5700XT
Display(s) 144Hz 1080p
Power Supply Evga GQ 750W
Software WindOof and Linux
As far as I have seen a photo of your rig in the other thread then it looks like you done nothing wrong.

Otherwise it may be that your AIO just makes little noise. In general people often say, when idle, air cooling is more silent than liquid cooling because of the absence of the pumping noise. You may hear that if your PC is on your desk (mine belongs below the desk for that reason for now).

If you want to see how AIO works in general and how one should mount it I can recommend a video from Gamers Nexus for this.
 
Joined
Nov 1, 2008
Messages
4,213 (0.70/day)
Location
Vietnam
System Name Gaming System / HTPC-Server
Processor i7 8700K (@4.8 Ghz All-Core) / R7 5900X
Motherboard Z370 Aorus Ultra Gaming / MSI B450 Mortar Max
Cooling CM ML360 / CM ML240L
Memory 16Gb Hynix @3200 MHz / 16Gb Hynix @3000Mhz
Video Card(s) Zotac 3080 / Colorful 1060
Storage 750G MX300 + 2x500G NVMe / 40Tb Reds + 1Tb WD Blue NVMe
Display(s) LG 27GN800-B 27'' 2K 144Hz / Sony TV
Case Xigmatek Aquarius Plus / Corsair Air 240
Audio Device(s) On Board Realtek
Power Supply Super Flower Leadex III Gold 750W / Andyson TX-700 Platinum
Mouse Logitech G502 Hero / K400+
Keyboard Wooting Two / K400+
Software Windows 10 x64
Benchmark Scores Cinebench R15 = 1542 3D Mark Timespy = 9758
If y
So I transferred my PC into a new case yesterday (thread here) and in the process I mounted my AIO rad to the top of my case, now I seem to have what I can only describe as a sort of pulsating hum sound, it sounds like a fan but I'm sure it's not any of my case fans, questions is, is this likely to go away after the rad settles after being moved around or would it be better to mount the rad vertically? (how I had it previously) I tried to record it on my phone but you can't make it out, its barely noticeable but impossible to ignore now that I can hear it, so it's a rather annoying issue.
If you've got it top mounted and got the radiator lying horizontally, then that is the correct orientation. You may just have a little bit of air stuck in the pump and may need to wait for it to work its way out.
 
Joined
Jan 25, 2006
Messages
1,470 (0.21/day)
Processor Ryzen 1600AF @4.2Ghz 1.35v
Motherboard MSI B450M PRO-A-MAX
Cooling Deepcool Gammaxx L120t
Memory 16GB Team Group Dark Pro Sammy-B-die 3400mhz 14.15.14.30-1.4v
Video Card(s) XFX RX 5600 XT THICC II PRO
Storage 240GB Brave eagle SSD/ 2TB Seagate Barracuda
Display(s) Dell SE2719HR
Case MSI Mag Vampiric 011C AMD Ryzen Edition
Power Supply EVGA 600W 80+
Software Windows 10 Pro
Could well be normal and I just didn't notice it before now? but it's almost like a fan spinning up and slowing down constantly, just the fact that it's so quiet you wouldnt notice but when you do it's hard to "unnotice" it if that makes sense lol
 
Joined
Nov 1, 2008
Messages
4,213 (0.70/day)
Location
Vietnam
System Name Gaming System / HTPC-Server
Processor i7 8700K (@4.8 Ghz All-Core) / R7 5900X
Motherboard Z370 Aorus Ultra Gaming / MSI B450 Mortar Max
Cooling CM ML360 / CM ML240L
Memory 16Gb Hynix @3200 MHz / 16Gb Hynix @3000Mhz
Video Card(s) Zotac 3080 / Colorful 1060
Storage 750G MX300 + 2x500G NVMe / 40Tb Reds + 1Tb WD Blue NVMe
Display(s) LG 27GN800-B 27'' 2K 144Hz / Sony TV
Case Xigmatek Aquarius Plus / Corsair Air 240
Audio Device(s) On Board Realtek
Power Supply Super Flower Leadex III Gold 750W / Andyson TX-700 Platinum
Mouse Logitech G502 Hero / K400+
Keyboard Wooting Two / K400+
Software Windows 10 x64
Benchmark Scores Cinebench R15 = 1542 3D Mark Timespy = 9758
Could well be normal and I just didn't notice it before now? but it's almost like a fan spinning up and slowing down constantly, just the fact that it's so quiet you wouldnt notice but when you do it's hard to "unnotice" it if that makes sense lol

When moving it across to the new case, just make sure that you plugged the pump into the correct fan header and it is set to 100%, or if it is a fan that can handle PWM, then it is set for PWM in the bios, rather than voltage based fan control.
 
Joined
Jan 25, 2006
Messages
1,470 (0.21/day)
Processor Ryzen 1600AF @4.2Ghz 1.35v
Motherboard MSI B450M PRO-A-MAX
Cooling Deepcool Gammaxx L120t
Memory 16GB Team Group Dark Pro Sammy-B-die 3400mhz 14.15.14.30-1.4v
Video Card(s) XFX RX 5600 XT THICC II PRO
Storage 240GB Brave eagle SSD/ 2TB Seagate Barracuda
Display(s) Dell SE2719HR
Case MSI Mag Vampiric 011C AMD Ryzen Edition
Power Supply EVGA 600W 80+
Software Windows 10 Pro
When moving it across to the new case, just make sure that you plugged the pump into the correct fan header and it is set to 100%, or if it is a fan that can handle PWM, then it is set for PWM in the bios, rather than voltage based fan control.
The pump is plugged into the CPU fan header on the mobo and it runs at full tilt (I assume) 2.5krpm regardless if I try to change the voltage or PWM setting so no problem there, the case fans are all on a fan splitter and plugged into the sys_fan header with a custom fan curve, I guess it's not a big deal really, I just need to unhear it to block it out :laugh:
 
Top