• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

AMD Official UEFI vBIOS for Fury X, released Apr 5th

  • Thread starter Thread starter Deleted member 50521
  • Start date Start date
D

Deleted member 50521

Guest
This is the good part of all cards on market being reference. 1 update that works on ALL of them.
 
what is the Perf yield on that 50Mhz?
 
My custom Fury X BIOS is based on this one. I've run 1190/570mhz with the custom one.
 
My custom Fury X BIOS is based on this one. I've run 1190/570mhz with the custom one.

Which results in how much more FPS in gaming?
 
Which results in how much more FPS in gaming?

About 11% more.

Interestingly enough going from 1190/570 to 1190/600mhz makes the FPS go up another 6%.
 
Some budy knows if there is flash programs x64 to flash this fimwares , im seeming on the programs AtiFlash and AtiWinflash over here on TPU and both are made to x86.
 
Some budy knows if there is flash programs x64 to flash this fimwares , im seeming on the programs AtiFlash and AtiWinflash over here on TPU and both are made to x86.
ATI Winflash should work fine under 64-bit Windows
 
We'll give this a go, just flashed both of my Nanos
 
Hello guys,

i have a Fury-non-X from Sapphire which uses the reference PCB and i unlocked all the cores using a modded BIOS back in the day. Do you reckon i could just flash the Fury-X-Bios now? I do have that BIOS switch, so it should be hard to actually brick the card. But if it is futile i won't waste any time by asking you first.
 
Hello guys,

i have a Fury-non-X from Sapphire which uses the reference PCB and i unlocked all the cores using a modded BIOS back in the day. Do you reckon i could just flash the Fury-X-Bios now? I do have that BIOS switch, so it should be hard to actually brick the card. But if it is futile i won't waste any time by asking you first.

I hardly think that is a good idea.
 
But why? The Board is identical, all my shaders work (at 1050MHz at least) so from that POV it should fit. I just don't know if there is some other form of lock down that prevents us from doing that.
 
Fury does not have the pump management. They have different vrm as well. I would say flashing a stock FuryX bios onto a Fury is dangerous. 99% it is going to brick your card.

Use a BIOS editing tool to compare the two different BIOS first then you will realize there are vast amount of differences.
 
But why? The Board is identical, all my shaders work (at 1050MHz at least) so from that POV it should fit. I just don't know if there is some other form of lock down that prevents us from doing that.

It'll work but your fan control will be a little messed up. Just use a manual fan profile.
 
Back
Top