• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Anyone had this problem with userbenchmark?

Joined
Oct 3, 2024
Messages
8 (0.03/day)
System Name Z690 Maximus Hero
Processor Intel I-7 13700K
Motherboard Asus ROG Maximus Hero Z690
Cooling Vetroo Lurker 360 AIO top mounted
Memory GSkill DDR5 6000Mhz 32Gb
Video Card(s) Founders Edition Nvidia 3090ti
Storage San Zang S7000 (total cost, 70 bucks!) 512Gb X 2 set up in RAID 0
Display(s) Element 50 inch 4K
Case Vetroo
Power Supply Corsair HX1200
Software Win 11 Pro X64
userbench fail.jpg


So, I'm trying to benchmark my system since getting my powercolor rx6900xt ultimate working again after it was (presumed dead) for about 2 years, and then get the result pictured above. Re ran it several times.
Checked the log and got this :
userbenchfail2.jpg


Now, the worst part of it is that i get this very same result when benchmarking my 3090 ti FE, which is the GPU I replaced the Rx 6900 XT with, when it started failing to give a video output signal.
Anyone else here had this issue? Both cards benchmark without issues on passsmark and 3dmark.
 
Well, it is Luser Benchmark after all...
 
Back
Top