MxPhenom 216
ASIC Engineer
- Joined
- Aug 31, 2010
- Messages
- 13,188 (2.43/day)
- Location
- Loveland, CO
System Name | Main Stack |
---|---|
Processor | AMD Ryzen 7 9800X3D |
Motherboard | Asus X870 ROG Strix-A - White |
Cooling | Air (temporary until 9070xt blocks are available) |
Memory | G. Skill Royal 2x24GB 6000Mhz C26 |
Video Card(s) | Powercolor Red Devil Radeon 9070XT 16G |
Storage | Samsung 9100 Gen5 1TB | Samsung 980 Pro 1TB (Games_1) | Lexar NM790 2TB (Games_2) |
Display(s) | Asus XG27ACDNG 360Hz QD-OLED | Gigabyte M27Q-P 165Hz 1440P IPS | LG 24" 1440 IPS 1440p |
Case | HAVN HS420 - White |
Audio Device(s) | FiiO K7 | Sennheiser HD650 + Beyerdynamic FOX Mic |
Power Supply | Corsair RM1000x ATX 3.1 |
Mouse | Razer Viper v3 Pro |
Keyboard | Corsair K65 Plus 75% Wireless - USB Mode |
Software | Windows 11 Pro 64-Bit |
So im redoing this persons laptop with a fresh install of windows 64 bit, and i need to install all the drivers again. The laptop as a Ati Xpress X1250 in it, and so i went to the amd.ati site and got the driver for it. it was catalyst 10.2 for Windows Vista 64 bit which i thought would work with the windows 7 64 bit i installed. and So it installed fine and i restarted and the desktop was just a white screen with lines going across. Should i just get the driver from the dell website instead??
EDIT: nvm im just getting all the drivers from Windows Update
hmm got the driver through windows update but its still doing the lines but it not a completely white screen. it goes away though
guys i need help. there's something going on with the graphics driver or something. if a thing comes up and like dims the screen to make sure i want ot install that or whatever the white lines will go across the screen. It wasnt like this before when it was windows Vista 32 bit. Im pretty sure the drive i got through windows update should work with 64 bit OS. It need to get it working right before i give it back to the client
EDIT: nvm im just getting all the drivers from Windows Update
hmm got the driver through windows update but its still doing the lines but it not a completely white screen. it goes away though
guys i need help. there's something going on with the graphics driver or something. if a thing comes up and like dims the screen to make sure i want ot install that or whatever the white lines will go across the screen. It wasnt like this before when it was windows Vista 32 bit. Im pretty sure the drive i got through windows update should work with 64 bit OS. It need to get it working right before i give it back to the client
Last edited by a moderator: