Does ATItool fan control work for the ATI Silencer 4?
http://www.newegg.com/app/ViewProductDesc.asp?description=35-186-116&depa=0
http://www.newegg.com/app/ViewProductDesc.asp?description=35-186-116&depa=0
-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
ATItool Fan Control Question
- Thread starter TheJuice
- Start date
- Joined
- May 14, 2004
- Messages
- 27,049 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
yep if you connect the fan plug to your video card it will work
It even works with the Zalman fan I ordered with my Zalman ZM80C-HP! I just spliced the wiring from my X800Pro heatsink into the wiring coming off of the Zalman fan and plug it up into the card. Works like a charm and also keeps the noise down because I don't have to run it on a 12v power supply at 100%. ATITool is AWESOME!
S
SmiGDig
Guest
I have that same ATI Silencer plugged into my MSI 9800 Pro 128mb, how can I access the temperature monitoring and fan control options? Do they only appear if I soft mod the BIOS to an XT?
- Joined
- May 14, 2004
- Messages
- 27,049 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
the options appear if you have a temp. chip .. which you probabyl dont have .. see the article here: does my 9800 pro/xt support temp. monitoring
wazzledoozle
New Member
- Joined
- Aug 30, 2004
- Messages
- 5,358 (0.75/day)
- Location
- Seattle
| Processor | X2 3800+ @ 2.3 GHz |
|---|---|
| Motherboard | DFI Lanparty SLI-DR |
| Cooling | Zalman CNPS 9500 LED |
| Memory | 2x1 Gb OCZ Plat. @ 3-3-2-8-1t 460 MHz |
| Video Card(s) | HIS IceQ 4670 512Mb |
| Storage | 640Gb & 160Gb western digital sata drives |
| Display(s) | Hanns G 19" widescreen LCD w/ DVI 5ms |
| Case | Thermaltake Soprano |
| Audio Device(s) | Audigy 2 softmod@Audigy 4, Logitech X-530 5:1 |
| Power Supply | Coolermaster eXtreme Power Plus 500w |
| Software | XP Pro |
I have an Iceberg 4, i have it plugged into the case fan mini molex on my motherboard, is there any way future versions of ATITool could monitor this?