Bare Metal Basics

[Asuredawn]

To view this case mod, go here.



Specs:
CPU : AMD R5 1600 @3.725GHz +0.082vGPU : Sapphire RX480 Nitro OC+Motherboard : Gigabyte Aorus AX370 Gaming K5RAM : G.Skill (F4-2800c16d-16gvg) 2×8GB @ 2800cl14-14-14Storage : Crucial MX100 512GB SSD, Seagate 1TB, Western Digital 1TBCase : CoolerMaster XB Evo (Rev2)

Mods:
Painted top grill snow camo; Replaced GPU cooler with GPU-220, and added an aluminum plate I made with some copper sinks to the GPU's VRMs; Made a mounting plate for the ncase res to mount on the 120mm fan position in the rear of the case; Replaced CPU VRM sink with Heatkiller waterblock

A budget build, by watercooling standards at least, consisting of:#EKWB Supremacy Evo AM4 block.#Koolance GPU-220 block#Watercool.de Heatkiller VRM block#AlphaCool NexXxoS XT45+2x140mm Rosewill fans#FrozenQ ncase res#Liang D5s with EK X-Revo top#Soft Copper Tube, 10ft, from Lowe's#Monsoon Economy Hardline fittings, 1/2" OD, x10#XSPC rotary fittings, 2x90°, 5x45°#Koolance Low profile 90° swivel fitting, x1

 

[Patrick3463]

This is what happens when kids have too much money or adults have no 3d vision. It looks like there was no tubing management. Its just as bad leaving cables without routing them behind motherboard. Please redo it. Its awful. get a pattern, a general concept and stick with it. To me it looks like all tubes were random or you changed the idea of your pc every bend.

 

[Amite]

Luv the copper tubing. Rig looks great. Good effort.

 

[BrianJoseph]

I voted 10/10 because:

Because there are a bunch of haters. Great job man!