CYBERPUNK 2077 O.F.

[mayhemmodz]

HARDWARE
CASE COOLER MASTER MASTERFRAME 700
ASUS ROG Maximus Z790 HERO
Intel Core i9-14900K
ROG Strix GeForce RTX® 4080 OC Edition 16GB GDDR6X
Corsair 192GB (2x96GB) 5200Mhz DDR5
Asus ROG STRIX 1000W GOLD

SSD NVMe 4086 GB X2
SSD FURY Renegade 4TB PCIe 4.0 NVMe
COLLING CUSTOM EKWB

stay tuned....

 

[mayhemmodz]

Hi guys hardware shots!

 

[mayhemmodz]

Hi guys we start. Creating the LED housing plate, this case has a dual function is a case but also a benchmark houses that can be used as a tester, it has a lot of holes that in my case must be covered, my intention is to build a LED plate with themed graphics.

I make a cardboard shape to calculate the dimensions that I will then go to use EPR the cut on acrylic.

Make a cardboard silhouette to calculate the dimensions that I will then go to use EPR the cut on acrylic.

These 2 panels will be superimposed ..

 

[mayhemmodz]

EKWB component arrived

I chose these fans the EKWB QUANTUM PULSE

as well as being beautiful they have a different connection system which I wanted to try is a waterfall which eliminates many centimeters of extra cable. They are connected to each other through these 68 pin cables (power and RGB) only the last fan is connected to the appropriate cable which converts the 8 pins into split 2 cables, the classic 2 fan power points and the 3 ARGB pins which go to the motherboard and to the rgb controller.

two quantum surface series radiators, interesting feature is that it has inlets and outlets at both ends with significant advantages.

14mm tubes my favorites

 

[de.das.dude]

nice (y)

 

[mayhemmodz]

working on fangrill

little rear panel on the case..

paiting the motherboard tray cover.

rear case panels

graphics applied soon

 

[mayhemmodz]

completing the motherboard tray will be on led.

completing the rear panels

 

[mayhemmodz]

mounting fan grills.

next step creating arasaka laterals frames on radiator

 

[mayhemmodz]

radiator customization..

next step motherboard customization

 

[mayhemmodz]

motherboard disassembling

painting parts

mounting contact frame

EK-Quantum Momentum² ROG waterblock mounted

additional cover on chipset dissipator

 

[mayhemmodz]

 

[Hyderz]

The craftsman ship and the details are astoundingly good

 

[droopyRO]

Even though i got Cyberpunk 2077 as a pre-order back in 2019, i only began playing it a few days ago, the wait was worth it, it is a superb game on almost all levels. Even though my RTX4070 is giving it's best to get around 60 fps. at 1440p with FG + RT path tracing. It is one of the best gaming experiences i ever had. Hope your project goes well, thanks for sharing !

 

[mayhemmodz]

hi guys, putting led in the mltherboard tray

ram customization

 

[mayhemmodz]

hi guys, putting led in the mltherboard tray

ram customization

 

[Caring1]

Meh, the CPU cutout in the Motherboard tray is in the work spot.

 

[Dr. Dro]

Hey, this is basically my PC, except with some thematic and water cooling. Nice

 

[mayhemmodz]

The EKWB bracket for vertical video card mounting has arrived, a few small modifications and it's ready.

 

[mayhemmodz]

working on gpu holder side panel

 

[mayhemmodz]

working on led side plate gpu holder

alluminium paint with graphix and them blue sea

 

[mayhemmodz]

completing gpu shield

 

[mayhemmodz]

completing gpu shield

 

[mayhemmodz]

near to the end...

 

[mayhemmodz]

is time to refilllllllllll....

 

[mayhemmodz]

mod is complete... thanks to all has followed this worklog ...
thank you to ek waterblocks and cablemod for their great support

mod on!!