• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

dont know wich update need to me

CheeseMan007

New Member
Joined
Nov 2, 2024
Messages
8 (0.04/day)
I want to update my videocard filmware bios to support UEFI but the subvendor say AMD/ATI and i dont know wich version need to me for update, pls help me
 

Attachments

  • 1730543517920.png
    1730543517920.png
    49.6 KB · Views: 89
I want to update my videocard filmware bios to support UEFI but the subvendor say AMD/ATI and i dont know wich version need to me for update, pls help me
We want to assist you but with the information you gave us, we can't do anything.

Make one large picture of the whole PCB (both sides)
Make a picture of the memory which is on the PCB nearby the GPU.

We need clear and good pictures otherwise it is hard to pin point a different bios for your card.
 
I create this pictures, i dont know if it good because i dont know realy what do you need sorry...
 

Attachments

  • 1730548850636.png
    1730548850636.png
    1.2 MB · Views: 62
  • 1730548874655.png
    1730548874655.png
    1.3 MB · Views: 62
  • 1730548893565.png
    1730548893565.png
    1.5 MB · Views: 65
Hope this is good now
 

Attachments

  • 20241102_141324.jpg
    20241102_141324.jpg
    1.8 MB · Views: 43
  • 20241102_141317.jpg
    20241102_141317.jpg
    2.3 MB · Views: 41
  • 20241102_141251.jpg
    20241102_141251.jpg
    2.9 MB · Views: 48
  • 20241102_141242.jpg
    20241102_141242.jpg
    1.9 MB · Views: 40
  • 20241102_141237.jpg
    20241102_141237.jpg
    1.7 MB · Views: 35
  • 20241102_141228.jpg
    20241102_141228.jpg
    1.7 MB · Views: 42
  • 20241102_141156.jpg
    20241102_141156.jpg
    1.7 MB · Views: 38
I create this pictures, i dont know if it good because i dont know realy what do you need sorry...

Ok 1002 6FDF 1002 0B31, open gpu-z, go to advanced tab and look for anything relating to samsung memory(Click the V), you find it post a screenshot here
 
Ok 1002 6FDF 1002 0B31, open gpu-z, go to advanced tab and look for anything relating to samsung memory(Click the V), you find it post a screenshot here
Hynix AJR :)
 
The following bioses might work:

Download amdvbflash 2.93 and follow the steps below
For RX 500 Series (Polaris) and Older:

Get amdvbflash 2.93

https://www.techpowerup.com/download/ati-atiflash/

Then look for Version 4.68, underneath 4.68 you will see a link to show older version, click that and you should see version 2.93

Follow these steps carefully:

1. Open your "C:" drive in Windows, create a new folder, call it atiflash.

2. Extract the contents of atiflash_293.zip to the "C:\atiflash" folder

3. Find the bios file you downloaded and rename the bios file to 5 digits with .rom on end Example RX 580, change file to rx580.rom (r****.rom)

4. Move r****.rom to the "C:\atiflash" folder

5. Open the start menu, type cmd, when cmd.exe appears right click it and hit "Run as administrator"

6. At the command prompt type in cd\ and press enter until only C:\> is on the screen.

7. Type in cd/atiflash and press enter, you should see C:\atiflash>

8. Type in amdvbflash.exe -i to identify the gpu you want to flash with a 0, 1, or 2)

9. At the C:\atiflash> prompt type in
amdvbflash.exe -unlockrom 0
(there is a space between the e and -unlockrom and 0)(0 is the number zero)
press enter and you will be prompted that the "ROM Unlocked" (or 1, 2)

10. At the C:\atiflash> prompt type in
amdvbflash.exe -f -p 0 r****.rom
(there is a space between the .exe and -f, and a space between -f and -p and 0).
(Or 1, 2)

Press Enter

Follow directions on screen and if flash is successful exit the command prompt and restart, windows should show up on screen.
 
The following bioses might work:

Download amdvbflash 2.93 and follow the steps below
Just to add.


 
Last edited:
Soo just aksing now wich bios need for me? :D
The 1s provided above should work to give you a performance boost from 1100 up to 1244/1284, use the tool and guide link @VuurVOS provided
 
You need to enable UEFI in your motherboard BIOS settings and that will probably mean a clean install of windows as the drive partitions are different.

The RX580 should already support UEFI but it will never work unless your motherboard supports it
 
I haven't seen the most important question asked: Why do you want to flash your graphics card? If it is working, do not flash it.

Especially these Chinese recycled mining cards - they're already beaten to an inch of their death the time you get them "new" (the components have been ravaged by high intensity workloads with no maintenance whatsoever for years on end, just reinstalled on a new PCB before being sold to you), if they started to malfunction it's just the hardware having run its course. That's why you don't buy these dregs even if they're cheap.
 
I want to play valorant but it say need secure boot enabled

But my video card not support uefi what need to secure boot

But if i update the videcard all my dara loss? Or something happening?
 
I want to play valorant but it say need secure boot enabled

But my video card not support uefi what need to secure boot

But if i update the videcard all my dara loss? Or something happening?

An UEFI GOP-enabled VBIOS is required, yes. But your motherboard also needs to be set to native UEFI mode (with CSM disabled) - if Windows was installed in CSM mode, you might have some trouble booting after making the switch. Could also just work, depends on system configuration. In any case, you will need to flash a compatible BIOS on this card. It's one of those above, can't make a more precise statement (tell you which one it is exactly) because you have a counterfeit, unlicensed graphics card that was made of components scavenged from boards used in Chinese Ethereum farms. Since there is no quality control nor assurance that the parts used are the same, you might run into even more trouble if you flash the wrong one.

On a side note, what kind of draconian anti-cheat is Riot using? Jesus. Do they really believe this will stop cheaters?
 
pls can you help me how to use atiflash because it wont work and i dont know what to do
 
Valorant needs: TPM 2.0 and secure boot enabled to play apparently
 
Back
Top