- Joined
- Nov 5, 2004
- Messages
- 385 (0.05/day)
- Location
- Belgium, Leuven
Processor | I7-6700 |
---|---|
Motherboard | ASRock Z170 Pro4S |
Cooling | 2*120mm |
Memory | G.Skill D416GB 3200-14 Trident Z K2 GSK |
Video Card(s) | Rx480 Sapphire |
Storage | SSD Samsung 256GB 850 pro + bunch of TB |
Case | Antec |
Audio Device(s) | Creative Sound Blaster Z |
Power Supply | be quit 900W |
Mouse | Logitech G5 |
Keyboard | Logitech G11 |
Hello there, I got a little prob here on my old PC.
For a while now, my FBS doesn't want to run on 133/33MHZ.
When I select it, he just detects 124/31 (which is one of the options I can select in the bios)
On 100MHZ, everything runs fine, but on 133 I can't even run the dxdiagn. directdraw or direct3d
Since I had an old Athlon 1.2, I just ran it on 12x
However, now I installed an 2000+ (which is only detected as a 1900+) and ofc,
the old problem remains.
I already did a biosflash a while ago, I checked the ram, did a format, run@bios-safemode,
installed other displaydrivers
My system is:
2000+
1.5GB SDRAM (3X512)
standard xp-cooling (gets to 54C@load on 133MHZ)
300W supply
KT7A / VIA KT133 rev.1.0 (Abit says it doesn't support XP, but don't mind that crap, Abit sucks, they pulled just one of their hoax)
For a while now, my FBS doesn't want to run on 133/33MHZ.
When I select it, he just detects 124/31 (which is one of the options I can select in the bios)
On 100MHZ, everything runs fine, but on 133 I can't even run the dxdiagn. directdraw or direct3d
Since I had an old Athlon 1.2, I just ran it on 12x
However, now I installed an 2000+ (which is only detected as a 1900+) and ofc,
the old problem remains.
I already did a biosflash a while ago, I checked the ram, did a format, run@bios-safemode,
installed other displaydrivers
My system is:
2000+
1.5GB SDRAM (3X512)
standard xp-cooling (gets to 54C@load on 133MHZ)
300W supply
KT7A / VIA KT133 rev.1.0 (Abit says it doesn't support XP, but don't mind that crap, Abit sucks, they pulled just one of their hoax)