• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Fix RX580 with hardware programmer

XzReaN

New Member
Joined
Apr 6, 2024
Messages
5 (0.01/day)
Hello,
I am using Rx 580 Graphics card. One day, while changing the cards, 1 card did not work again. I used this method. It didn't happen again. The fans do not spin, but the computer turns on, there is no image, the graphics card processor does not heat up. What's the problem?

I don't know English, I use translation.
 
Last edited by a moderator:
If you want to flash with a hardware programmer you will still need the proper bios for your card.

For others to help you find the correct bios to flash you will need to tell us the exact model and ideally provide us with a clear picture of the memory chips.
 
Xfx Rx 580 8 gb
samsung vram

vram photo
 

Attachments

  • WhatsApp Görsel 2024-04-06 saat 04.57.41_f368eae3.jpg
    WhatsApp Görsel 2024-04-06 saat 04.57.41_f368eae3.jpg
    156.2 KB · Views: 78
  • zz.jpg
    zz.jpg
    172.8 KB · Views: 84
You can attempt start by trying these:



 
Given the clock rates there are the gaming bios.
 
I tried all bios. no image. The processor does not heat up.

GPU riser is working. It displays with another graphics card.
 

Attachments

  • rsr.jpg
    rsr.jpg
    164.5 KB · Views: 71
It just could be bad, the next step would be to re paste it and put the cooler back on, then boot the system with a good GPU and that one in a secondary slot. Then we can see if its even detected by the system.
 
I am using the same graphics card. When we plug both in at the same time, there is still no image. the computer turns on. I tried it via remote connection but it doesn't see the gpu. Only working GPU appears. 2. no gpu

During remote connection events, there is a small screen and the flash does not work. I tried with ch341a and it still doesn't work.
 
I think the fuse is broken on the faulty card. Likely a short circuit.
 
Back
Top