- Joined
- Dec 6, 2005
- Messages
- 10,881 (1.62/day)
- Location
- Manchester, NH
| System Name | Senile |
|---|---|
| Processor | I7-4790K@4.8 GHz 24/7 |
| Motherboard | MSI Z97-G45 Gaming |
| Cooling | Be Quiet Pure Rock Air |
| Memory | 16GB 4x4 G.Skill CAS9 2133 Sniper |
| Video Card(s) | GIGABYTE Vega 64 |
| Storage | Samsung EVO 500GB / 8 Different WDs / QNAP TS-253 8GB NAS with 2x10Tb WD Blue |
| Display(s) | 34" LG 34CB88-P 21:9 Curved UltraWide QHD (3440*1440) *FREE_SYNC* |
| Case | Rosewill |
| Audio Device(s) | Onboard + HD HDMI |
| Power Supply | Corsair HX750 |
| Mouse | Logitech G5 |
| Keyboard | Corsair Strafe RGB & G610 Orion Red |
| Software | Win 10 |
I'm back in full WCG production, two x58 rigs, each with a X5670 CPU at about 4Ghz+ They're humming away next to me at work, where I need the warmth and the power is cheap 
BOTH are running Ubuntu LTS
So here's the thing... one rig is showing the CPU at 100% all the time. The second rig is only running about 45%-70% CPU while WCG is running. I'm using "psensor" to monitor the systems.
I know there is a setting somewhere to set the CPU utilization for WCG, but I can't seem to find it... I looked in the BOINC UI, but can't find any settings... can someone point me in the right direction?
BOTH are running Ubuntu LTSSo here's the thing... one rig is showing the CPU at 100% all the time. The second rig is only running about 45%-70% CPU while WCG is running. I'm using "psensor" to monitor the systems.
I know there is a setting somewhere to set the CPU utilization for WCG, but I can't seem to find it... I looked in the BOINC UI, but can't find any settings... can someone point me in the right direction?
