roger_wilco
New Member
- Joined
- Aug 16, 2005
- Messages
- 2 (0.00/day)
I am using GPU-Z 0.4.8 to monitor temperatures on my Radeon 5970 card (dual core).
GPU-Z seems to plot the VDDC temperatures for both cores upside down, unlike e.g. GPU temperatures which are plotted correctly.
Please refer to the attached screenshots: On the sensors tab in the lower three temperature plots you can see that the red bar is going down. It should go up since a few seconds ago the GPU load was increased from 0% to 90%. The displayed temperatures in the center column are correct.
OS: Win7 Home Premium x64
GPU-Z seems to plot the VDDC temperatures for both cores upside down, unlike e.g. GPU temperatures which are plotted correctly.
Please refer to the attached screenshots: On the sensors tab in the lower three temperature plots you can see that the red bar is going down. It should go up since a few seconds ago the GPU load was increased from 0% to 90%. The displayed temperatures in the center column are correct.
OS: Win7 Home Premium x64
Attachments
-
GPUZ-0.4.8_sensors-plot-error2.gif -
GPUZ-0.4.8_sensors-plot-error2_pg1.gif